Outdoor
DUAL ZONE OUTDOOR PIR MS-12FE
2 Dual Zones : Variable Angle up to 180 degrees
DUAL ZONE system reduces false alarms, making outdoor use more reliable !

Data Download
Feature
DUAL ZONE system
This sensor is equipped with a DUAL ZONE system which initiates an alarm only when detection occurs in both horizontal and downward zones simultaneously.
No alarm signal is output if only one zone is obstructed by small animals, vehicles etc.
180 degree wide angle coverage
180 degree coverage detection is possible by using both upper and lower sensors in "OR" detection mode.
Rain Proof Housing
Rain-proof structure enables outdoor installation.
Various mounting position can be chosen such as wall and pole.
Various detection patterns
Perimeter, window or wall detection can be selected by adjusting detection zone with area masking sheet.
MS-12FE equipped with two sensors can cover two perimeters or two windows.
Sensitivity adjustment
Sensitivity can be adjusted between 30% and 170%.
Specification
Model | MS-12FE |
---|---|
Detection system | Passive infrared |
Coverage | 2sets of MS-12TE sensor |
Coverage adjustment | Horizontal : +/-90° Detection distance : 6.6' to 40' (2 to 12m) (By adjusting vertical angle of downward zone) |
Supply voltage | 12 to 30V DC (non-polarity) |
Current consumption | 40mA MAX. |
Alarm output | Dry contact relay output N.C./N.O. selectable Contact capacity : 30V (AC・DC), 0.5A MAX. (Resistive load) Contact operation : Detection time + off delay (2sec. -5min. approx.) |
Tamper output | Dry contact relay output N/C Contact capacity : 30V (AC/DC), 0.5A MAX. (Resistive load) |
Operation LED | Red LED Blinking at warming up (LED disabled) Lighting at alarm (LED disabled) |
Pulse count settings | once / three times (with a switch) |
Sensitivity adjustment | Approx. 30% (L) - Approx. 170% (H) (By potentiometer) |
Detection mode | AND / OR selectable |
Connection | Terminals |
Ambient temperature | -4F to +122F (-20C to +50C) |
Mounting position | Indoor / Outdoor |
Weight | 16.5oz (470g) |
Appearance | Body : AES resin Lens : PE resin |
Accessory | Tapping screw : 2 Area masking sheet : 2 |
*Specifications and design are subject to change without prior notice.