Products

Outdoor

DUAL ZONE OUTDOOR PIR MS-12TE
Dual Zone : Variable Angle up to 90 degrees

DUAL ZONE system reduces false alarms, making outdoor use more reliable !

DUAL ZONE OUTDOOR PIR MS-12TE Dual Zone : Variable Angle up to 90 degrees

Data Download

  flile type file name Download
Product pictures JPG Pic_MS-12TE.jpg
Product catalogs PDF Cat_MS-12TE.pdf

go to page top

Feature

DUAL ZONE system

This sensor is equipped with a DUAL ZONE system which initiates an alarm only when detection occurs in both horizontal and downward zones simultaneously.
No alarm signal is output if only one zone is obstructed by small animals, vehicles etc.

Rain Proof Housing

Rain-proof structure enables outdoor installation.
Various mounting position can be chosen such as wall and pole.

Various detection patterns

Perimeter, window or wall detection can be selected by adjusting detection zone with area masking sheet.

Sensitivity adjustment

Sensitivity can be adjusted between 30% and 170%.

go to page top

Specification

Model MS-12TE
Detection system Passive infrared
Coverage When horizontal detection
Angle : 90°
Detection distance : 40' (12m)
Horizontal zone : 7 zones
Downward zone : 7 zones
Coverage adjustment Horizontal : +/-90°
Detection distance : 6.6' to 40' (2 to 12m)
(By adjusting vertical angle of downward zone)
Supply voltage 12 to 30V DC (non-polarity)
Current consumption 35mA MAX.
Alarm output Dry contact relay output N.C./N.O. selectable
Contact capacity : 30V (AC・DC), 0.5A MAX. (Resistive load)
Contact operation : Detection time + off delay
(2sec. -5min. approx.)
Tamper output Dry contact relay output N/C
Contact capacity : 30V (AC/DC), 0.5A MAX. (Resistive load)
Operation LED Red LED
Blinking at warming up (LED disabled)
Lighting at alarm (LED disabled)
Pulse count settings once / three times (with a switch)
Sensitivity adjustment Approx. 30% (L) - Approx. 170% (H) (By potentiometer)
Connection Terminals
Ambient temperature -4F to +122F (-20C to +50C)
Mounting position Indoor / Outdoor
Weight 13.7oz (390g)
Appearance Body : AES resin
Lens : PE resin
Accessory Tapping screw : 2
Area masking sheet : 1

*Specifications and design are subject to change without prior notice.

go to page top