Products

Quad beam

PHOTOELECTRIC BEAM SENSOR PB-100FA
Outdoor 330ft. (100m)

The TAKEX intelligent "QUAD" photoelectric beam is especially designed for outdoor protection.
Unique Quad beams are synchronized to reinforce the range and stability in severe weather conditions.
The PB-FA series beams provide a wide choice of field options which result in considerable flexibility for a variety of application requirements.

PHOTOELECTRIC BEAM SENSOR PB-100FA Outdoor 330ft. (100m)

Data Download

  flile type file name Download
Product pictures JPG Pic_PB-100FA.jpg
Product catalogs PDF Data_PB-100FA.pdf

go to page top

Feature

4 SYNCHRONIZED HIGH POWER INFRARED

* 4 beams are "and-gated", which helps to prevent false alarms by falling leaves and small animals.
*Active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.
* External light compensation circuit provides excellent tolerance to sun light, automobile head lights, fluorescent light or mercury light.

EASY BEAM ALIGNMENT

* Audible signal for alignment
Alignment tone aids in quick set-up of beams.
The tone becomes maximum at the peak beam level.
* Sensitivity attenuation LED lights when beam is attenuated, which shows low sensitivity.
* Monitor jack output
* Target color
* Wide adjustment (horizontally ±90°,vertically ±10°

RoHS CERTIFIED COMPLIA

Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls, Polybrominated diphenyl ethers.

AUTO-GAIN LOCK

Optimal sensitivity gain is automatically set at any coverage distance within the maximum protection distance. Auto-Gain lock is easily confirmed with sound check.

PROGRAMMED AGC

Sensitivity is automatically increased in bad weather to cope with fog, heavy rain, frost or snow.

ALARM MEMORY

Alarm memory LED located on receiver can be automatically reset.

PROTECTION AGAINST FROST/DEW

Special hoods attached on sensor cover keep beam protection continuing without interruption even when the cover is screened by frost or dew.

OTHER FEATURES

*Tamper output (transmitter and receiver)
*Polycarbonate cover excellent at anti-shock
*Optional accessories

go to page top

Specification

Model PB-100FA
Detection system Near infrared beam interruption system
(4 beam simultaneous interruption)
Infrared beam Double modulation pulsed beams by LED
Protection distance outdoor 330’(100m) or less
Max. arrival distance 3300’ (1000m)
Response time 50msec. to 700msec. variable (Standard : 50msec.)
Power supply 12V to 30V DC (non-polarity)
Current consumption 70mA or less at protection
(max.105mA or less)
Alarm output Dry contact relay : NO or NC (selectable)
Reset : Interruption time + off-delay (approx.1.5sec)
Contact capacity : 30V (AC/DC) 1A or less
Tamper output Dry contact : NC
Contact operation : Output when cover is detached
Contact capacity : 30V (AC/DC) 0.1A or less
Alarm LED Red LED (receiver) lights when an alarm is initiated
Sensitivity attenuation LED Red LED (receiver) lights when beam reception attenuated
Functions Tone indicator, Alarm memory indication,
Programmed AGC, Auto-gain lock,
Monitor jack, Target color
Beam adjustment Horizontal : ±90°, Vertical : ±10°
Ambient temperature range -31°F to +151°F (-35°C to +66°C)
Mounting position Outdoor (IP55)
Wiring Terminals
Weight Transmitter : 42oz (1,200g)
Receiver : 45.5oz (1,300g)
Appearance Resin (wine red)

*Specifications and design are subject to change without prior notice.

go to page top