Glass Sensor
GLASS BREAK SENSOR GS-1100E
Glass break sensor GS-1100E is an ultrasonic sensor designed to detect the sound of breaking glass such as plate glass windows, doors, showcases etc.
Data Download
Feature
EASY OPERATI0N CHECK
The alarm LED and the environmental LED are available for easy operation and environmental check.
ALARM MEMORY FUNCTl0N
When the unit has been activated the alarm LED(Red) will flash for 3 minutes, after which it will remain constantly lit for 47 minutes.
This will enable identification of triggered devices in a multiple use scenario.
EASY INSTALLATI0N
The protection area is 7m Max. vertically and 8m Max.
horizontally (Variable range is 80°horizontally).
A single unit can protect one or more plate glass windows, whieh makes easy installation and maintainance possible.
OTHER FEATURES
● Sensitivity adjustment volume
● Slim and compact (32.0mm thickness of unit)
● Glass checker EG-1000 is available (Optional)
Specification
| Product name | GLASS BREAK SENSOR |
|---|---|
| Model | GS-1100E |
| Detection system | Ultrasonic microphone |
| Coverage | Horizontal : 8m max. Vertical : 7m max. (plate glass of 400 square cm or more, one side 20cm) |
| Angle adjustment | Horizontally +/-40degrees |
| Power voltage | 9V to 20V DC (non-polarity) |
| Current consumption | 30mA or less |
| Alarm output | Dry contact relay N.C. Reset : Approx. 2sec. AC/DC 30V ・ 0.1A or less |
| Alarm LED | Red LED lights at alarm |
| Alarm memory | Alarm LED is flickering for 3 min.,lighting for 47 min. and then automatically reset at detection. |
| Tamper signal | Dry contact N.C. |
| Environmental LED | Light at bad environments(at check mode) |
| Ambient temperature range | +14°F to +122°F(-10°C to +50°C) |
| Mounting position | Indoor(wall) |
| Wiring | Terminals |
| Weight | 3.86oz(120g) |
| Appearance | ABS resin(white) |
This unit is designed to detect the sound given when glass is broken due to impact.
lf glass is broken due to stress or other means this may not be detected.
