Low Current
LOW CURRENT PHOTOELECTRIC BEAM SENSOR PB-IN-75SW
Outdoor 250ft. (75m)
A HYBRID LOW CURRENT PHOTOELECTRIC BEAM SENSOR DESIGNED FOR SOLOR APPLICATION.
Data Download
Feature
SYNCHRONIZED HIGH POWERED BEAMS
100 times sensitivity margin and 10 times distance margin by using double modulation and Phase Locked Loop (PLL) circuit.
* External light compensation circuit provides excellent tolerance against sun light, automobile, flourescent and mercury lights.
* Upper and Lower beams are "and-gated", which helps to prevent false alarms from falling leaves and small animals.
FOUR FREQUENCIES SELECTION
4 separate choices of frequency avoids cross-talk in stacked or long linear installations.
LOW CURRENT CONSUMPTION
Low current consumption design for use with solar panels and low current output control panels.
Under 6mA when used DC6V. (approx. 3.7mA for transmitter only)
RECEIVING LEVEL INDICATION FUNCTION
* Sensitivity attenuation LED Lights when beam is attenuated.
Convenient for checking sensitivity margin after putting cover on.
* Monitor jack output
Tester to measure receiving level is available on the market, therefore axis adjustment can be done correctly.
RESPONSE TIME
Response time can be field advised from 50ms-700ms.
PROTECTION AGAINST FROST/DEW
Special front cover hood design prevents false alarms when the cover is coated with frost or dew.
ENVIRONMENT MONITOR
Annunciation by relay output of specific low signal level due to fog, rain or snow.
DESIGN FEATURES
* Extensive Beam alignment adjustment.
(Horizontal +/-90°, Vertical +/-10°)
* Tamper output for high security.
* Strong PC resin used for cover.
* Automatic gain lock.
Specification
| Name | Low current photoelectric beam sensor |
|---|---|
| Model | PB-IN-75SW |
| Detection system | Near infrared beam interruption system (TR,-RE, beams simultaneous interruption) |
| Infrared beam | Double modulation pulsed beam by LED |
| Protection distance | Outdoor 250ft (75m) or less |
| Max. arrival distance | Tenfold 2500ft (750m) |
| Response time | 50m sec. to 700m sec. variable (standard 50m sec.) |
| Power supply | 5V to 8V DC or 10V to 30V DC (with-polarity) |
| Power consumption | 5V to 8V DC : 6mA(TR. side 3.7mA) or less when armed 10V to 30V DC : 25mA(TR. side 15mA) or less when armed |
| Alarm output | Dry contact relay Form C Action : Interruption time + off-delay 2 secs. Contact capacity : 30V (AC/DC) 1A |
| Environment output | Dry contact relay Form C Action : an output when environment causes low signal level Contact capacity : 30V (AC/DC) 0.5A |
| Tamper output | Dry contact relay Form B Action : trigger an output when cover is opened Contact capacity : 30V (DC) 0.1A |
| Alarm LED | Red LED (receiver) lights on when an alarm is initiated |
| Sensitivity attenuation LED | Red LED (receiver) lights on when beam reception is attenuated |
| Operation LED | Green LED (transmitter) lights on when cover is opened with power on |
| Additional functions | Four frequencies selection Environmental fade out monitor Beam strength monitor output |
| Beam alignment adjustment | Horizontal : +/-90°, Vertical : +/-10° |
| Ambient temperature range | -13F to +140F (-25C to +60C) |
| Installation | Outdoor |
| Wiring | M3 self-up terminals |
| Weight | Transmitter : 42oz (1200g) Receiver : 45.5oz (1300g) |
| Appearance | PC resin (wine red) |
This sensor is designed to detect intrusion and to initiate an alarm; t is not a burglary or crime preventing device. TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God (including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation or improper maintenance.
