Quad beam
PHOTOELECTRIC BEAM SENSOR PB-IN-50HFA
Outdoor 50m(165 ft.)
The TAKEX intelligent "QUAD" photoelectric beam is especially designed for outdoor protection.
Unique Quad beams are synchronized to work together to reinforce the range and stability in severe weather conditions. The PB-IN-HFA series beams are equipped with many features which provide a wide choice of field selectable options. These options result in considerable flexibility for a variety of application requirements.
Data Download
Feature
4 SYNCHRONIZED HIGH POWER INFRARED
*4 beams are "and-gated", which help to prevent false alarms from falling leaves and small animals.
*The active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.
*External light compensation circuit provides excellent tolerance against sun light. automobile head lights, fluorescent light or mercury light.
FOUR FREQUENCIES SELECTIONS
4 separate choices of frequency avoid cross-talk.
BEAM TRANSMISSION STRENGTH SELECTION
2 levels of beam transmission strength which can be set to suit the protection distance.
EASY BEAM ALIGNMENT
* Audible signal for alignment
An alignment tone aids in quick set-up to beams.
The tone becomes maximum at peak of beam level.
* Sensitivity attenuation LED
Lights when beam level is attenuated,which shows low sensitivity.
* Monitor jack output
* Target color
* Wild adjustment (horixontally ±90°,vertically ±10°)
RoHS CERTIFIED COMPLIANT
Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyl, Polybrominated diphenyl ether.
AUTO-GAIN LOCK
Optimal sensitivity gain is automatically set at any coverage distance up to the maximum protection distance.
Auto-Gain lock is easily confirmed by sound check.
PROGRAMMED AGC
Sensitivit is automatically increased in bad weather to contend with fog, heavy rain, frost or snow.
ALARM MEMORY
Alarm memory LED located on receiver can be automatically reset (flickering 5 min. after an alarm and auto-reset 55 min. after that) or manually controlled.
PROTECTION AGAINST FROST/DEW
As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.
ENVIRONMENTAL MODULE BUILT-IN
Environmental trouble signal is sent when beam reception level is reduced below an acceptable level.
OTHER FEATURES
*Tamper output (transmitter and receiver)
*Polycarbonate cover excellent at anti-shock
*Optional accessories
*Target color
Specification
| Product name | Photoelectric beam sensor |
|---|---|
| Model | PB-IN-50HFA |
| Detection system | Near infrared beam interruption system (TR.-RE. 4 beams simultaneous interruption) |
| Infrared beam | Double modulation pulsed beams by LED |
| Protection distance | Outdoor 50m (165') or less |
| Max. arrival distance | 500m (1650') |
| Response time | 50msec. to 700msec. variable (Standard : 50msec.) |
| Power supply | 12V to 30V DC (non-polarity) |
| Current consumption | 60mA or less at protection (max. 95mA or less) |
| Alarm output | Dry contact relay : N.C. or N.O. (selectable) Reset : Interruption time + off-delay (approx. 1.5sec) Contact capacity: 30V (AC/DC) 1A or less |
| Enviromental output | Dry contact relay : N.C. or N.O. (selectable) Contact operation : Output when weather condition gets worse Contact capacity: 30V (AC/DC) 1A or less |
| Tamper output | Dry contact relay : N.C. Contact operation : Output when receiver cover is detached Contact capacity: 30V (AC/DC) 0.1A or less |
| Alarm LED | Red LED (receiver) lights when an alarm is intiated |
| Sensitivity attenuation LED | Red LED (receiver) lights when beam reception is attenuated |
| Functions | Modulated beam frequancy selection, Tone indicator, Environmental module,Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor jack. |
| Beam adjustment | Horizontal : +/-90°, Vertical : +/-10° |
| Ambient temperature range | -31F to +151F (-35C to +66C) |
| Mounting position | Outdoor (IP55) |
| Wiring | Terminals |
| Weight | Transmitter : 42oz (1200g) Receiver : 45.5oz (1300g) |
| Appearance | Resin (wine red) |
The specifications are subject to change without notice.
