Products

Outdoor

BATTERY OPERATED TRIPLE MIRROR PIR SENSOR PIR-T15WR(W)
Wide angle protection

The battery operated PIR for outdoor application integrating unique triple mirror optical system and signal processing technology eliminates nuisance alarms from small animals (Wide angle protection up to 49’ (15m) × 80°)

BATTERY OPERATED TRIPLE MIRROR PIR SENSOR PIR-T15WR(W) Wide angle protection

Data Download

  flile type file name Download
Product pictures JPG Pic_PIR-T15WR(W).jpg

go to page top

Feature

TRIPLE MIRROR OPTICAL SYSTEM

The unique combination of triple mirrors and three twin pyros enable 4 selectable operation modes including low position, high position, pet, and high density; for distances up to 49’ (15m) from a mounting height of 6.6’ (2m) to 20’ (6m), throughout a full 80°.

OPTIMISED DETECTION AREA

The triple mirror optical system features a geared mirror array allowing detection patterns to be dynamically optimised for maximum performance depending on the chosen mounting height and operation mode.

LONG BATTERY LIFE

Operated with SAFT lithium-thionyl battery LS33600 (3.6V DC) x 1 or 2 pcs, PIR-T15WR can assure proper operation for approx. 3 years(using 1 battery)

PET IMMUNITY

Independently controlled pyro devices in each optical unit use intelligent signal processing to eliminate nuisance alarms from small animals, and a dedicated pet operation mode further enhances discrimination performance against medium-sized animals.

PRECISE AREA ADJUSTMENT

Precise detection area adjustment is made possible by projecting coloured LED’s onto the surface of each mirror -visible only from inside the detection zone during the alignment process allowing sensitive zones to be fine-tuned to individual site requirements as desired. Unnecessary areas can be cancelled using the supplied area-masking sheet.

DESIGN CONSCIOUS

The PIR-T15WR’s unassuming design allows it to blend discreetly into any industrial, commercial or domestic environment, and the internally adjustable optic system helps to conceal the detection area and direction for more secure protection.

OTHER FUNCTIONS

Enhanced features including creep zone detection, near area cancellation, dual outputs, and lightning surge protection make the PIR-T15WR a key addition to the TAKEX family of high performance intrusion detection sensors.

go to page top

Specification

Model BATTERY OPERATED TRIPLE MIRROR PASSIVE SENSOR
Model number PIR-T15WR(W)
Detection system Passive infrared (Triple mirror)
Detection area Wide angle protection (80°)
Detection distance : Max 15m(49'), 108rays(54pais)
Power supply SAFT lithium-thionyl battery LS33600 (3.6V DC) x 1 or 2 pcs
Battery life Approx. 3 years
(at normal temperature, 100 times transmission/day with 1 battery, excluding wireless transmitte)
Contact operation ・Alarm output   : One-shot operation when detecting intrusion
・Tamper output : Continuous output in the event og cover monitor error
・Alarm + Tamper : Continuous output in the event of self diagnosis error
         /alignment position error
・Low battery  : Continuous output in the event of Low battery error
Alarm output Contact method : Dry semi-conductor contact, N.C.
Contact capacity : 3.6V DC 0.01A (resistive load)
Tamper output Contact method : Dry semi-conductor contact, N.C.
Contact capacity : 3.6V DC 0.01A (resistive load)
Low barttery output Contact method : Dry semi-conductor contact, N.C.
Contact capacity : 3.6V DC 0.01A (resistive load)
Battery power output 3.0 to 3.6V DC 65mA max. (1 or 2 new batteries)
Alarm LED Red LED :
 Blinks during warm up
 Lights up when detection intrusion (only in test mode)
 Continuously blinks in the event of cover monitor error
 Continuously blinks in the even of alignment position error
 Continuously blinks in the event of self diagnosis error
 Continuously blinks in the event of low battery error
LED area checker Red/Green LED :
 Continuously blinks in the event of alignment position error
Functions Sensitivity selection, Operation mode selection, Self diagnosis, Low battery monitoring, Temperature compensation, LED area checker/Alignment position monitoring, Environmental adjustment, Creep zone detection, Walk test
Mounting height 2.0 to 6.0 m (varies depending on operation mode)
・Low position mode : 2.0 to 2.7m (6.6' to 9')
・High position mode : 2.7 to 3.5m (9' to 11.5')
・Pet mode       : 2.5 to 3.0m (8.3' to 10')
・High density     : 2.0 to 6.0m (6.6' to 20')
Area angle adjustment Horizontally ±45° (without steps : marked in every 5°)
Veratically 17° (without steps)
Ambient temperature range -20 to +60°C (no condensation and freezing)
(Battery performance may deteriorate below 0°C or above +40°C.)
Mounting position Indoor/outdoor wall
(mountable on pole/ceiling using optional accessories)
IP rating IP55
Weight Approx. 850g(30oz) (excluding batteries)
Appearance Body/Window : Resin (White)

*Specifications are subject to change without notice.

go to page top