Outdoor
DUAL ZONE OUTDOOR PIR Battery operated MX-12FRAM
Dual zone detection system reduces false alarms for reliable outdoor protection
Data Download
Feature
DUAL ZONE DETECTION SYSTEM
Horizontal and downward zones require simultaneous detection preventing nuisance alarms from small animals and passing vehicles.
180 DEGREE WIDE ANGLE COVERAGE
Up to 180° of complete coverage, with independent 2m - 12m adjustable protection distance for left and right sides for maximum installation versatility.
LONG BATTERY LIFE
・Enjoy long-term peace of mind with 5 years battery life using a single CR123A.
・Economical and environmentally friendly.
ANTI-MASKING
Protected by sophisticated Anti-Masking technology with near-lens awareness, designed to initiate an alarm if the device is compromised.
BACK TAMPER
Equipped with both front and back tampers to detect interference or attempted theft of the sensor any time of the day or night.
IMPROVED AREA MASKS
Durable area masks stored within the device allow the coverage pattern to be customised to specific site requirements.
PULSE COUNT & SENSITIVITY ADJUSTMENT
The pulse count can be changed between 1 & 3, and the sensitivity adjusted between 60 & 120% to maintein operational stability in difficult conditions.
Specification
| Model | MX-12FRAM |
|---|---|
| Detection system | Passive infrared |
| Coverage | Horizontal detection Angle : 180°, Detection distance : 12m(40') Horizontal zone : 14 zones Downward zone : 14 zones |
| Coverage adjustment | Detection distance : 2 to 12m(10 to 40') [10 ranges] (by adjusting vertical angle of downward curtain) |
| Supply voltage | Nominal voltage 3V DC(CR123A×1 [Approx. 1400mAh]) |
| Battery life | Approx.5 years (at normal temperature, excluding wireless transmitter) |
| Low battery | 2.6V DC |
| Current consumption | Standby 30μA , max. 5.5mA |
| Alarm output | Solid state switch N.C./N.O. selectable · Contact capacity : 3V DC 0.01A max. (Resistive load) · Contact operation : Detection time (+2 sec.) (Alarm detection / Masking detection) |
| Trouble output | Solid state switch N.C. · Contact capacity : 3V DC 0.01A max. (Resistive load) (Masking detection / Low supply voltage / Self-diagnosis error) |
| Tamper output | Solid state switch N.C. · Contact capacity : 3V DC 0.01A max. (Resistive load) (Cover tamper / Back tamper(when enabled)) |
| Operation LED | Red LED ·Warm-up (Blinking) ·Alarm detection (Lights approx.1sec only Walk test) ·Masking detection (Blinking rapidly) ·Self-diagnosis error (Blinking slowly) ·Low battery (Blinking slowly) |
| Pulse count | 1 / 3 times (selectable with mode setting) |
| Sensitivity adjustment | 60% / 80% / 100% / 120% (selectable with mode setting) |
| Anti-masking | OFF / LV.0 / LV.1 / LV.2 (selectable with mode setting) |
| Alarm prohibition timer | 3s / 180s (selectable with mode setting) |
| Functions | Anti-masking, Back tamper, Trouble alarm, Low battery monitoring |
| Ambient temperature | -25°C to +60°C (-13° F to +140° F) |
| Ambient humidity | 93% max. |
| Mounting position | Indoor / Outdoor |
| Mounting height | 1.2m |
| Ingress protection | IP55 (Wall mount) |
| Weight | 470g (16.5oz) |
| Appearance | Body : resin (white) / Lens : resin (white) |
| Optional | Pole attachment : BP-32 |
* Specifications and design are subject to change without prior notice.
