Count Sensor
PEOPLE COUNT SENSOR CS-P01
Unique PIR image analysis for people count. Output separated signal for Entry/Exit with accurate performance.
Data Download
Feature
DIRECTION DETECTION
Passive infrared image analysis traces the heat source in the detection area and outputs Entry/Exist signal individually.
People count system with thermal image protects the privacy of the guests.
SIMULTANEOUS DETECTION FOR MULTIPLE PEOPLE
Multiple people can be detected by PIR image analysis from the ceiling.
<Simultaneous detectable people>
6 people max. at mounting height 2.5m
9 people max. at mounting height 5.0m
AREA CHECK FUNCTION
Detection area can be confirmed with LED and sound indicator by walk in the detection area during sensor setup.
SIMPLE SETTING
Simplified all setup such as Installation height, sensitivity, detection area by Dip switch.
(PC is not required for setup)
DETECTION AREA
2.3 x 1.7m at mounting height 2.5m
3.7 x 2.7m at mounting height 4.0m
Specification
| Model | People count sensor |
|---|---|
| Model number | CS-P01 |
| Detection system | Passive infrared image analysis method |
| Detection area (mounting height) |
[Standard mode] Approx. 1.7 x 2.3m (at 2.5m) Approx. 2.7 x 3.7m (at 4.0m) [High position mode] Approx. 2.3 x 3.3m (at 5.0m) |
| Supply voltage | 10 to 30V DC (with polarity) |
| Current consumption | 350mA or less (at 12V DC) 180mA or less (at 24V DC) |
| Output ①② | Dry contact (Semi-Conductor) N.C./N.O. selectable ・Contact capacity : 30V (AC/DC) 0.25A Max. (resistive load)(protective resistor integrated) ・Contact operation : Count (0.2 sec. output / 0.2 sec. pause per count) Direction (one shot approx. 2 sec.) *in Area check mode (one shot 1 sec.) |
| Operation LED | ・Warm-up (Green & Red Blinking) ・Area check mode : Zone A detected : Green lights Zone B detected : Red lights ・Walk test mode & during operation : Zone B-> A detected : Green lights (0.2 sec.)* Zone A-> B detected : Red lights (0.2 sec.)* *For direction discrimination setting : one shot approx. 2 sec. [Note] Operation LED can be turned ON/OFF during operation with settings ・Operation check : Green lights (at approx. 10 sec. intervals) after Warm up [Note] Operation LED can be turned ON/OFF during operation with settings |
| Buzzer | ・Area check mode : Sounds for each detection in the detection area (approx. 2 sec.) ・Walk test mode & during operation : Sounds depending on the direction of passage (0.2 sec.) [Note] Buzzer can be turned ON/OFF during operation with settings |
| Functions | Sensitivity adjustment, Rresolution adjustment, output operation changeover, output contact schangeover, Area check mode, Walk test mode |
| Connection | Terminals |
| Ambient temperature | 0°C to + 40°C (without condensation) |
| Mounting position | Indoor |
| Mounting height | 2.5 to 5.0m |
| Weight | Approx. 400g |
| Appearance | Resin (white, grey) |
*Specifications are subject to change without notice.
