Flame Passive Sensor
FLAME PASSIVE SENSOR FP-5500E
IDEAL COMBINATION SENSOR, DETECTING FLAME [Max.15m (50ft.)]
AND INTRUSION [Wide angle 15m(50ft.)] , MINIMIZES NUISANCE
ALARM AND REALIZES SAFER OUTDOOR PROTETION.
Data Download
Feature
TWO OUTPUT MODES SELECTABLE
Two output modes are available; "AND" detection mode and "Individual" detection mode.
• In "AND" detection mode, an alarm signal is output when both flame and passive infrared sensor detect during the selected AND timer.
• In "Individual" detection mode, flame or passive alarm signal is output when either the flame sensor or passive sensor detects.
FORCED OUTPUT OPERATION
The flame sensor outputs flame alarm signal after continued detection for a certain period of time, or detects twice during the selected AND timer even in "AND" detection mode, without any detection by passive sensor.
ALARM MEMORY
The activated sensor can be easily identified by Alarm memory indication (flame and passive sensor individually).
Memory LED blinks for 3 min. and lights on for 47 min. after alarm activation.
SENSIVITY ADJUSTMENT (Passive Sensor)
For outdoor operation in "Individual mode", the sensitivity adjustment enables reliable discrimination between human body and other objects depending on the environment.
<20 / 50 / 80 / 100%>
[Recommended setting]
AND mode : 100%.
Individual mode : 20%, 50%, 100%.
OPERATION SET-UP BY DETECTION TIMER (Flame Sensor)
The alarm will be activated only when the sensor detects a flame (ultraviolet rays) for longer than set time.
Four detection times are selectable by DIP switch on the sensor.
< 1 / 3 / 6 / 15sec.>
[Recommended setting]
AND mode : 1sec.
Individual mode : 3sec. 6sec. 15sec.
ANGLE ADJUSTMENT
Three-part rotation mechanism enables adjustment in various angles.
Specification
| Model | FP-5500E |
|---|---|
| 【Flame sensor】 | |
| Detection system | Ultraviolet rays (Detection wave length 185 to 260nm) |
| Detection distance | 15m(50') :15cm(5.90'') flame on 4cm (1.57'') square pan in front 10m(33') : 7cm(2.75'') lighter flame in front |
| Detection area angle | Approx. 120° conically |
| Detection setting | Detection timer : 4steps (1sec, 3sec, 6sec, 15sec) Detection sensitivity : (H [100%], L [50%]) *Selectable only in "AND" mode (Fixed to H [100%] in "AND" mode |
| Alarm LED (RED) | Inside front window • Lighting at alarm (Detection time + off delay. Approx. 2 sec.) *Blinking (3 min) / Lighting (47 min) at memory |
| 【Passive sensor】 | |
| Detection system | Passive infrared |
| Detection area angle | Wide Angle 15m (50') Max |
| Sensitivity setting | 4 steps (100%, 80%, 50%, 20%) |
| Alarm LED (RED) | Inside front window • Lighting at alarm (Detection time + off delay. Approx. 2 sec.) *Blinking (3 min) / Lighting (47 min) at memory |
| 【Power supply】 | 10V to 30VDC (non-polarity) |
| 【Power consunmption】 | 25mA Max. |
| 【Alarm① output】 | |
| Contact operation | 【AND mode】 • When flame sensor detects twice within set “AND” timer, (Detection time after 2nd detection + off delay. Approx. 2 sec.) or • When flame sensor detects for “Flame duration time” (Detection time after 30/60 sec + off delay. Approx. 2 sec.) 【Individual mode】 • When flame sensor detects (Detection time + off delay. Approx. 2 sec.) |
| Contact method | Dry contact relay (Semi-Conductor) (N.C. / N.O. selectable) |
| Contact capacity | 30V (AC/DC) 0.25A Max. (resistive load) |
| 【Alarm② output】 | |
| Contact operation | 【AND mode】 • When both flame and passive sensor detect within set “AND” timer (Detection time (2 sec Min.) 【Individual mode】 • When passive sensor detects (One shot. Approx. 2 sec) |
| Contact method | Dry contact relay (Semi-Conductor) (N.C./N.O. selectable) |
| Contact capacity | 30V (AC/DC) 0.25A Max.(resistive load) |
| 【Alarm memory】 | Reset after blinking (3 min) and lighting (47 min) (Operative individually with flame and passive sensors) * No indication when Alarm LED is off |
| 【Ambient temperature range】 | -20°C to + 50°C (-4°F to + 122°F) without condensation and freeze |
| 【Mounting position】 | Indoor / outdoor (IP43) |
| 【Connections】 | Lead wire [Cord length : 0.5m (20")](6 cores : 2×power, 4×alarm) |
| 【Weight】 | Approx. 550g (including flange) |
| 【Appearance】 | Body : Resin (Black) |
The specifications are subject to change without notice.
