Battery Operated
BATTERY OPERATED PHOTOELECTRIC BEAM SENSOR TXF-125DM
DOUBLE MODULATION
Create temporary or permanent long-range perimeter
protection in even the most remote of areas.
Data Download
Feature
HIGHEST RELIABILITY
Double modulation technology ensures stability and reduces the possibility of unwanted activations from ambient light,
and the IP65 design ensures integrity regardless of the installation conditions, preventing ingress from water,
dust and insects whilst allowing moisture within to evaporate, prohibiting condensation.
INCREASED FLEXIBILITY
With 4 selectable frequencies, multiple beam sets can be used in both linear and stacked configurations without risk of crosstalk, whilst adjustable detection distance allows a single beam set to be re-deployed in a variety of different installations throughout its operational life.
TXF-125DM can be installed in Beam Towers using the optional extension cable.
BEAM ANGLE ADJUSTMENT
Featuring ±90° horizontal and ±20° vertical optical head adjustment,
TXF-125DM can cater for even the most dynamic of terrains,
ensuring high performance intrusion detection in almost any environment.
SAVING TIME AND MONEY
Designed for compatibility with leading wireless systems, TXF-125DM dramatically reduces the time and cost of installations by requiring no wiring or civil engineering work, ideal for rapid deployment in temporary or permanent secure perimeter intruder detection systems.
LONG BATTERY LIFE
6 x 3.6V (17Ah) batteries (TX: 4pcs, RX: 2pcs) can power TXF-125DM for up to 3 years of service,
with the option of battery sharing for wireless transmitter units.
HYBRID HARDWIRED OPTION (TX/RX)
For even greater installation flexibility, hard-wire one side of TXF-125DM using the optional power converter unit
BPC-125T/125R - ideal if either the transmitter or receiver side is close to a main power source.
OTHER FUNCTIONS
Enhanced features include a drip-proof housing designed to channel precipitation away from the optical face of the beam,
anti-bird spikes to prevent our feathered friends from alighting on the units, and lightning surge protection.
Specification
| Model | TXF-125DM |
|---|---|
| Detection system | Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption) |
| Infrared beam | Double modulation pulsed beam by LED (near infrared beam light-emitting diode) |
| Protection distance | Outdoor 100m(330') or less |
| Protection distance setting | 25m(82'), 50m(165'), 75m(247'), 100m(330') (4 distances selectable) |
| Distance margin (maximum arrival distance) |
10 times 1000m(3,300') |
| Response time | 50ms, 100ms, 250ms, 500ms (4-level changeover) |
| Modulated beam frequency selection | 4 channels |
| Power supply voltage | 3.6VDC (recommended battery: SAFT lithium thionyl chloride battery LS33600) |
| Current consumption | 1,650µA Transmitter : Approx. 1,130µA (during protection) Receiver : Approx. 520µA (during protection) (normal temperature, 3.6V DC) |
| Battery life | Transmitter: Approx. 3 years (at normal temperature, with 4 recommended batteries, excluding wireless transmitter) Receiver: Approx. 3 years (detects 100 times a day, at normal temperature, with 2 recommended batteries, excluding wireless transmitter) |
| Alarm output (receiver only) |
Contact method: Solid state swich form C Contact capacity:3.6V DC 0.01A (resistive load) |
| Environment output (receiver only) | Contact method: Solid state swich form C Contact capacity:3.6V DC 0.01A (resistive load) |
| Low battery output (transmitter and receiver) | Contact method: Solid state swich (N.O.) Contact capacity:3.6V DC 0.01A (resistive load) |
| Tamper output (cover, back) (transmitter and receiver) |
Contact method: Solid state swich (N.C.) Contact capacity:3.6V DC 0.01A (resistive load) |
| Power output (transmitter and receiver) |
3.0 to 3.6V DC 65mA max. (2 × new batteries) |
| Beam adjustment | Horizontal: ±90°, Vertical: ± 20° |
| Alarm LED | Red LED (Receiver) ON : when alarm is generated (Active only when the cover is open) |
| Attenuation LED | Red LED (Receiver) ON : when beam is attenuated (Active only when the cover is open) |
| Ambient temperature | –25℃ to+60℃ (–13°F to+140°F) (No freezing or condensation) (The battery function may decrease at 0°C or less, or +40°C or more) |
| Functions | Sound check Monitor jack Upper/lower beam switch Low battery indication Wireless alignment checker connection Battery saving Repeat output |
| IP rating | IP 65 |
| Mounting position | Outdoor, Indoor |
| Weight | Transmitter : 1,350g (47.3oz) (excluding batteries) Receiver : 1,350g (47.3oz) (excluding batteries) |
| Appearance | Cover : Resin (Wine red) Base : Resin (Black) |
Specifications and design are subject to change without prior notice.
