Quad beam
PHOTOELECTRIC BEAM SENSOR PXB-200HF-KH
OUTDOOR 660ft (200m)
High Performance Photoelectric Beam Sensors for beam tower that combine stability and reliability
Data Download
Feature
DOUBLE MODULATION
Double modulated beams are designed to distinguish the external lights. It increases the reliability in the outdoor security system. (50,000 lux light immunity)
QUAD HIGH POWER BEAM
The beam power is 100 times of the minimum requirement.
The beam distance is 10 times of the described specification.
This high power beam maintains the ability to operate reliably in inclement weather.
WIDE BEAM
The pitch between upper and lower beam is wider than previous models; drastically reducing false alarms initiated by birds and falling leaves.
ADVANCED RETICLE SIGHTING SYSTEM
Enables a faster and easier alignment process.
INCREASED VERTICAL ANGLE ADJUSTMENT
The horizontal is still ±90°
±20° Better accommodates alignment on uneven terrain, when compared to existing models (±10°).
TARGET COLOR
Structure colors are tuned to the Peak Wavelengths of the Human Eye Response (Photopic eye response), to be easily targeted in the beam alignment process.
BI-DIRECTIONAL WIRELESS ALIGNMENT CHECKER
One person can accomplish system alignment in a fraction of the time; for dramatic savings on labor costs. (sold separately) . Bi Directional communication distance is max 200m.
LOW CURRENT CONSUMPTION
50% reduction in current consumption allows cost savings upfront (by reducing the required wire gauge on installation), and continues the savings for years to come with lower electrical consumption.
ECO-FRIENDLY
RoHS certified compliant: free from Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated biphenyl, and Polybrominated biphenyl ether.
LIGHTENING PROTECTION
Maximum Lightening induced surge protection to 10,000VDC (normal mode) and 15,000VDC (common mode).
Specification
| Model | PXB-200HF-KH |
|---|---|
| Detection system | Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption) |
| Infrared beam | Double modulation pulsed beam by LED |
| Protection distance | Outdoor 660' (200 m) or less |
| Max. arrival distance | 6600' (2000 m) |
| Response time | 0.05 sec. to 0.7 sec. (Variable at pot) |
| Power supply | 12 to 30V DC (Non-polarity) |
| Current consumption | 34 mA or less |
| Alarm output | Dry contact relay output form C Contact action : Interruption time (Min.2sec.) Contact capacity : 30V (AC/DC) 0.25A (resistive load) Protective resistor |
| Environmental output | Dry contact relay output form C Action : Activated when weather condition gets worse Contact capacity : 30V (AC/DC) 0.25A (resistive load) Protective resistorv |
| Alarm LED | Red LED (Receiver) ON : when an alarm is initiated |
| Attenuation LED | Red LED (Receiver) ON : when beam is attenuated |
| Ambient temperature range | –31°F to+151°F (–35°C to+66°C) |
| Beam adjustment | Horizontal: ±90°, Vertical: ± 20° |
| Functions | Modulated beam frequency selection,Tone indicator, Environmental module, Beam power selection,Transmitting power adjutment, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitorjack, Response time adjustment, Upper/Lower beam switch, Wireless checker |
| Mounting positions | Outdoor, Indoor |
| Wiring | Terminals |
| Weight | Transmitter : 12.6 oz (360g) Receiver : 15.8 oz (450g) |
| Appearance | Optical unit : Resin Body : Resin |
