Flame Sensor
FLAME SENSOR WITH SPEAKER FS-3000E
HIGH SENSITIVITY FOR INDOOR USE
FLAMES DO NOT WAIT !
A WARNING MESSAGE BEFORE IT GROWS INTO "FIRE".
DETECTS SMALL FLAMES IMMEDIATELY !
AN ULTRAVIOLET RAY DETECTION
FLAME SENSOR THAT OUTPUTS WARNING MESSAGES IN DIFFERENT LANGUAGES.
Data Download
Feature
GENERAL DESCRIPTION
Flame sensor FS-3000E quickly detects ultraviolet rays contained in flames and activates the built in message speaker.
CONVENIENT INSTALLATION BY BATTERY
FS-3000E can be powered from either type-3 alkaline battery or optional lithium battery.
EXTERNAL OUTPUT TO A SECURITY SYSTEM
FS-3000E does not only output a warning message but also outputs a form A (N/O) external output. It can be connected to a control panel which enables operation of other security equipments as a security system.
4 SELECTABLE LANGUAGES
The voice message can be selected among 4 languages. The speaker volume can be adjusted by the volume switch on the back.
OTHER FUNCTIONS
･ Compact design enables FS-3000E to be installed at any location. Easy separation of the sensor unit from the base simplifies installation and maintenance.
･ The LED flashes (lights approx. 0.1 sec / approx. 5 secs.) to annunciate low battery condition.
･ When power is turned on, 3 alarm sounds are activated. If no alarm sound is activated, check the power source.
OPERATION SET- UP BY DETECTION TIMER
The alarm will be activated only when the sensor detects a flame (ultraviolet ray) in accordance with the detection timer.
The 4 following detection times are selectable by the mode selector on the sensor body.
〈0.2 secs., 1 sec., 6 secs., 30 secs.,〉
Specification
| Product name | FLAME SENSOR WITH SPEAKER |
|---|---|
| MODEL NO. | FS-3000E |
| Detection system | Ultraviolet rays detection (Detected wave length <185 to 260nm>) |
| Detection distance | 33ft. (10m) [2.75"(7cm) flame] |
| Detection angle | Approx. 120゜(conically) |
| Sensitivity adjustment | Detection timer (0.2secs., 1sec., 6secs., 30secs.) |
| Power supply | ･ Type-3 alkaline battery (LR6) × 2(3V) … accessory ･ Exclusive lithium battery (CR17450E-R-2-CM2) × 1(3V) … optional |
| Power consumption | Stand by: 70μA or less Operate: 300mA or less (at max. volume of speaker activating) |
| BATTERY LIFE | Using type-3 alkaline battery … approx. 2 years (at stand by) Using exclusive lithium battery … approx. 5 years (at stand by) |
| LED | Indication : Red LED Alarm : Flash during message output Low battery : Light on 0.1 sec. every approx. 5 secs. |
| WARNING MESSAGE OUTPUT | Operation : Output warning message when detecting flames. Message selection : 4 options (*English *Spanish *French *Italian) Volume : Mute - max. approx. 80dB (3.3ft. <1m> from the front of speaker.) |
| EXTERNAL OUTPUT | NPN open collector output 30V (DC) 50mA, one-shot operation ("ON" when outputting) Output time : Same as message output time. |
| Wiring | Terminals |
| Ambient temp. range | 14F to 140F (-10C to +60C) without condensation Battery performance may decrease under 32F(0C)or beyond 104F(40C) |
| Installation | Indoor (Ceiling or wall mount) |
| Weight | approx. 8.1oz (230g) including battery(accessory) 1.8oz (50g) |
| Appearance | ABS resin (white) |
| Accessories | Tapping screw Φ4×25 2 pcs. Sensor locking screw Φ3×6 1 piece Exclusive battery case of Type-3×2 1 piece Type-3 alkaline battery LR6×2 |
