Products

Quad beam

PHOTOELECTRIC BEAM SENSOR PXB-200F
OUTDOOR 660ft (200m)

High Performance Photoelectric Beam Sensors that combine stability and reliability

PHOTOELECTRIC BEAM SENSOR PXB-200F OUTDOOR 660ft (200m)

Data Download

  flile type file name Download
Product pictures JPG Pic_PXB-200F.jpg

go to page top

Feature

DOUBLE MODULATION

Double modulated beams are designed to distinguish the external lights. It increases the reliability in the outdoor security system. (50,000 lux light immunity)

QUAD HIGH POWER BEAM

The beam power is 100 times of the minimum requirement.
The beam distance is 10 times of the described specification.
This high power beam maintains the ability to operate reliably in inclement weather.

WIDE BEAM

The pitch between upper and lower beam is wider than previous models; drastically reducing false alarms initiated by birds and falling leaves.

IP65 HIGHEST RATING IN THE INDUSTRY

Water tight bushings and seals maintain device integrity from water, insects, and dust; further inclusion of a breathable membrane prevents internal condensation from affecting performance.

ANTI-BIRD SPIKE

Keeps birds and small animals from roosting on the sensor, maintaining a clear detection path for increased reliability.

DRIP-PROOF HOUSING

Channels the elements (rain and snow melt) away from the optical surfaces of the sensor, avoiding false alarms caused by beam attenuation.

ADVANCED RETICLE SIGHTING SYSTEM

Enables a faster and easier alignment process.

INCREASED VERTICAL ANGLE ADJUSTMENT

The horizontal is still ±90°±20° Better accommodates alignment on uneven terrain, when compared to existing models (±10°).

TARGET COLOR

Structure colors are tuned to the Peak Wavelengths of the Human Eye Response (Photopic eye response), to be easily targeted in the beam alignment process.

BI-DIRECTIONAL WIRELESS ALIGNMENT CHECKER

One person can accomplish system alignment in a fraction of the time; for dramatic savings on labor costs. (sold separately) . Bi Directional communication distance is max 200m.

LOW CURRENT CONSUMPTION

50% reduction in current consumption allows cost savings upfront (by reducing the required wire gauge on installation), and continues the savings for years to come with lower electrical consumption.

ECO-FRIENDLY

RoHS certified compliant: free from Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated biphenyl, and Polybrominated biphenyl ether.

LIGHTENING PROTECTION

Maximum Lightening induced surge protection to 10,000VDC (normal mode) and 15,000VDC (common mode).

go to page top

Specification

Model PXB-200F
Detection system Near infrared pulsed beam interruption system
(TR-RE 4 beam simultaneous interruption)
Infrared beam Double modulation pulsed beam by LED
Protection distance Outdoor 660' (200 m) or less
Max. arrival distance 6600' (2000 m)
Response time 0.05 sec. to 0.7 sec. (Variable at pot)
Power supply 12 to 30V DC (Non-polarity)
Current consumption 32 mA or less
Alarm output Dry contact relay output form C
Contact action : Interruption time (Min.2sec.)
Contact capacity : 30V (AC/DC) 0.25A (resistive load)
Protective resistor
Environmental output Dry contact relay output form C
Action : Activated when weather condition gets worse
Contact capacity : 30V (AC/DC) 0.25A (resistive load)
Protective resistor
Tamper output Dry contact relay (N.C.)
Action : Activated when cover is detached
Contact capacity : 30V (AC/DC) 0.1A (resistive load)
Protective resistor
Alarm LED Red LED (Receiver) ON : when an alarm is initiated
Attenuation LED Red LED (Receiver) ON : when beam is attenuated
Ambient temperature range –31°F to +151°F (–35°C to +66°C)
Beam adjustment Horizontal: ±90° Vertical: ±20°
Functions Tone indicator, Environmental module, Monitor jack, Tamper
Response time adjustment, Upper/Lower beam switch, Wireless checker
Automatic gain control
Mounting positions Outdoor, Indoor
IP rating 65
Wiring Terminals
Weight Transmitter : 52.5oz (1500g)
Receiver : 54.3oz (1550g)
Appearance Resin (wine red)

go to page top