Explosion Proof
EXPLOSION-PROOF PHOTOELECTRIC BEAM SENSOR PXH-100EX
Data Download
Feature
Feature
Long-distance beam sensor for outdoor use equipped with intrinsically safe explosion-proof structure which can be used in hazardous areas of Class 1(Zone 1) and Class 2(Zone 2).
Two types of the product (”L” and “H”) with different frequencies available for mutual interference prevention in case of multi-level protection and long straight line protection.
Specification
| Product | Explosion-proof Photoelectric beam sensor |
|---|---|
| Model | PXH-100EXL PXH-100EXH |
| Test model number | Transmitter: No. T68885 Receiver : No : T68884 |
| Test model (100V) | Transmitter PXH-111EXL PXH-111EXH Receiver PXH-121EXL PXH-121EXH |
| Test model (200V) | Transmitter PXH-112EXL PXH-112EXH Receiver PXH-122EXL PXH-122EXH |
| Protection Distance | 100m or less |
| Max. arrival distance | 800m |
| Detection system | Near infrared pulsed beam interruption system |
| Infrared beam | Double modulation pulsed beam by LED |
| Response time | 0,.05 sec or more |
| Alarm output (relay built-in : receiver) |
Dry contact relay output form b (closed: in operation, open : on alarm) Contact action : Interruption time (Min. 2 sec) Contact capacity : AC/DC 30V・0.25A・Max.7.5VA (resistive load) |
| Power supply | 100V : AC100V (50/60Hz) 200V : AC200V (50/60Hz) |
| Current consumption | Transmitter : 4.6VA 50Hz・2.9VA 60Hz Receiver : 4.7VA 50Hz・3.0VA 60Hz |
| Ambient temperature range | -10 to +40˚C (no condensation and freezing) |
| Explosion-proof structure | Combination of "Intrinsically safe explosion-proof (ia)" and "Explosion-proof (d)" |
| Target gas | Flame-proof grade explosion class 2, Ignition temperature G4 |
| Installation area | Hazardous area class 1, or class 2 |
| Wiring | Terminals |
| Entrance of cable lead-in fitting | Pressure-resistant packing type JIS B0202 : Nominal designation of screw thread for thick steel conduit tube G1(PF1):CTG28 |
| Entrance of protection tube | G3/4 (PF3/4) |
| Weight | Transmitter/Receiver Approx. 10kg/unit |
| Appearance | Stainless steel plate, bake-coated with heat curing epoxy resin (Munsell N7) |
