Products

Outdoor

TRIPLE MIRROR PASSIVE SENSOR PIR-T15WE(W)

A unique triple mirror optical system with signal processing
technology eliminates nuisance alarms from small animals

TRIPLE MIRROR PASSIVE SENSOR PIR-T15WE(W)

Data Download

  flile type file name Download
Product pictures JPG Pic_PIR-T15WE_W.jpg
Product catalogs PDF Cat_PIR-T15WE_W.pdf

go to page top

Feature

TRIPLE MIRROR OPTICAL SYSTEM

The unique combination of triple mirrors and three twin pyros enable 4 selectable operation modes including low position, high position, pet, and high density; for distances up to 49’ (15m) from a mounting height of 6.6’ (2m) to 20’ (6m), throughout a full 80°.

OPTIMISED DETECTION AREA

The triple mirror optical system features a geared mirror array allowing detection patterns to be dynamically optimised for maximum performance depending on the chosen mounting height and operation mode.

PET IMMUNITY

Independently controlled pyro devices in each optical unit use intelligent signal processing to eliminate nuisance alarms from small animals, and a dedicated pet operation mode further enhances discrimination performance against medium-sized animals.

PRECISE AREA ADJUSTMENT

Precise detection area adjustment is made possible by projecting coloured LED’s onto the surface of each mirror -visible only from inside the detection zone during the alignment process allowing sensitive zones to be fine-tuned to individual site requirements as desired. Unnecessary areas can be cancelled using the supplied area-masking sheet.

DESIGN CONSCIOUS

The PIR-T15WE’s unassuming design allows it to blend discreetly into any industrial, commercial or domestic environment, and the internally adjustable optic system helps to conceal the detection area and direction for more secure protection.

OTHER FUNCTIONS

Enhanced features including creep zone detection, near area cancellation, dual outputs, and lightning surge protection make the PIR-T15WE a key addition to the TAKEX family of high performance intrusion detection sensors.

go to page top

Specification

Model TRIPLE MIRROR PASSIVE SENSOR
Model number PIR-T15WE(W)
Detection system Passive infrared
Detection area Wide angle (80°) detection
Detection distance: 49’(15m), 108 rays (54 pairs)
Power supply 9 to 28V DC (non-polarity)
Current consumption Max. 40mA
Alarm output ●Contact method
 Dry semi-conductor contact, N.C./N.O. selectable
●Contact operation
 One-shot operation when detecting intrusion
 Continuous output in the event of cover monitor error
 Continuous output in the event of alignment position error
 Continuous output in the event of self diagnosis error
 Continuous output in the event of power voltage error
 Continuous output in the event of long-term diagnosis error
●Contact rating
 24V (AC/DC) 0.25A (resistive load)
 (built-in contact protective resistor 3.3Ω)
External output ●Contact method
 Dry semi-conductor contact N.O.
●Contact operation
 One-shot operation/Off delay operation selectable
 when detecting intrusion
●Contact rating
 24V (AC/DC) 0.25A (resistive load)
  (built-in contact protective resistor 3.3Ω)
Tamper output ●Contact method
 Dry mechanical contact, N.C.
●Contact operation
 Continuous output
●Contact rating
 24V (AC/DC) 0.1A (resistive load)
  (built-in contact protective resistor 3.3Ω)
Alarm LED ●Red LED
 Blinks* during warm up
 Lights up* when detecting intrusion
 Continuously blinks in the event of cover monitor error
 Continuously lit in the event of alignment position error
 Continuously blinks in the event of self diagnosis error
 Continuously lit in the event of power voltage error
 Continuously blinks in the event of long-term diagnosis error
 (*ON/OFF selectable using the mode selector)
Memory LED ●Red LED
Blinks for 3 minutes during memory display, Auto reset operation either of continuous lighting for 47 minutes or blinking for 50 minutes selectable
(Blinks to lights/blinks, ON/OFF selectable using the mode selector)
Functions Sensitivity selection, Operation mode selection, Alarm memory LED, Selfdiagnosis, Low voltage monitoring, Temperature compensation,Tamper,LED area checker, Environmental adjustment ,Creep zone detection,Walk test mode, Near area cancellation, Long-term diagnosis
Mounting positions 6.6ʼ to 20ʼ(2.0 to 6.0m) (varies depending on the operation mode)
• Low position mode : 6.6ʼ to 9ʼ(2.0 to 2.7m)
• High position mode : 9ʼ to 11.5ʼ(2.7 to 3.5m)
• Pet mode : 8.3ʼ to 10ʼ(2.5 to 3.0m)
• High density mode : 6.6ʼ to 20ʼ(2.0 to 6.0m)
Area angle adjustment range Horizontal direction : 90° (by 5°pitch)
Vertical direction : 17° (no stage adjustment)
Ambient temperature range 25~+55℃(no condensation and freezing)
Installation place Indoor/outdoor wall surface
* Can be mounted on poles and ceilings (or under eaves) using optional accessories
IP rating IP55
Connections Terminals (M2.6 self up terminal)
Weight Approx. 600g
Appearance Body: ASA resin (gray), Window: PE resin (white)

go to page top