Products

Anti-Crawl

PHOTOELECTRIC BEAM SENSOR PXB-100ATC
Anti-Crawl and Anti-Corrosion OUTDOOR 330ft (100m)

Upper and lower beams individually detect objects.
The alarm output can be selected OR-gate (blocking either upper or lower beam) or AND-gate (blocking both upper or lower beam) according as a site.

PHOTOELECTRIC BEAM SENSOR PXB-100ATC Anti-Crawl and Anti-Corrosion OUTDOOR 330ft (100m)

Data Download

  flile type file name Download
Product pictures JPG Pic_PXB-100ATC.jpg

go to page top

Feature

ANTI-CRAWL DETECTION

Upper and lower beam individually detects the objects and issues a signal only by blocking each beam.

AT . HF SEPARATE OUTPUT

AT output : OR-gated by upper and lower beam.
HF output : AND-gated.

SYNCHRONIZED HIGH POWER BEAM

By synchronizing the timing of transmitting and receiving beam, the stacking system will be more reliable.

DOUBLE MODULATION

Double modulated beams are designed to distinguish the true beam signal from accidental or deliberate interference from sunlight, car headlights and other artificial light sources.
This increases the reliability in the outdoor security system.

QUAD HIGH POWER BEAM

The beam power is 100 times of the minimum requirement.
The beam distance is 10 times of the described specification.
This high power beam also realizes the reliability against the harsh conditions like fog, snow, heavy rain.

ECOLOGY

RoHS adapted - Environment friendly. Free from Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyl, Polybrominated diphenyl ether.

INSECT/WATER PREVENT

IP65 rated, with anti-insect bushing and special wading.

ANTI-BIRD SPIKE

Keeps birds and small animals away from the sensor, helping to reduce false alarms.

DRIP-PROOF HOUSING

Prevents rain and snow from streaming down the front side of housing, helping to avoid false alarm.

DUAL RING SIGHT

Enables better and clear view for easy beam alignment.

TARGET COLOR

The vivid color of the internal structure can be recognized easily from the far end in the beam alignment procedure.
The color differs between a transmitter and a receiver which helps easy installation and checking.

INCREASED RANGE ADJUSTMENT ALLOWANCE

Vertically ±20°compared with previous version.
It may adapt to the slope installation flexibly

WIRELESS ALIGNMENT CHECKER

Enables easy and accurate beam alignment.(Sold separately)

LIGHTNING PROTECTION

Minimizes the damage caused by induced lightning through wiring.
Rated up to 10,000V under normal mode and 15,000V under common mode.

go to page top

Specification

Model PXB-100ATC
Detection system Near infrared pulsed beam interruption system
(Anti-crawling, Anti-corrosion)
Infrared beam Double modulation pulsed beam by LED
Protection distance Outdoor 330' (100m) or less
Response time AT output : 0.05sec by upper/lower level simultaneous interruption
0.1/0.2/0.3/0.5sec by either level interruption
HF output : 0.05sec by upper/lower level simultaneous interruption
Power supply 12 to 30V DC (Non-polarity)
Current consumption Transmitter : 27mA Receiver : 48mA
Alarm output Dry contact relay output N.O./N.C. selectable
Contact action : Interruption time (Min.2sec.)
Contact capacity : 30V (AC/DC) 0.25A (resistive load)
Protective resistor
Environmental output Dry contact relay output N.O./N.C. selectable
Action : Activated when weather condition gets worse (Min.5sec.)
Contact capacity : 30V (AC/DC) 0.25A (resistive load)
Protective resistor
Tamper output Dry contact (N.C.)
Action : Activated when cover is detached
Contact capacity : 30V (AC/DC) 0.1A (resistive load)
Protective resistor
Alarm LED Red LED (Receiver) ON : when an alarm is initiated
Attenuation LED Red LED (Receiver) ON : when beam is attenuated
Ambient temperature range -31゚F to +151゚F(-35 to +66℃)
Beam adjustment Horizontal: ±90°, Vertical: ± 20°
Functions Modulated beam frequency selection,Tone indicator, Environmental
module, Beam power selection, Transmitting power adjutment,
Programmed AGC, Auto-gain lock function, Monitor Jack, Tamper,
Response time adjustment, Upper/lower beam switch Wireless checker
Mounting positions Outdoor, Indoor
IP rating 65
Wiring Terminals
Weight Transmitter : 49oz (1,400g) Receiver : 52.5oz (1,500g)
Appearance PC resin (wine red)

go to page top