Outdoor
PASSIVE INFRARED SENSOR PIR-50NE
Vertical curtain protection
A choice of Wide Angle(30m) and Long Range(50m) protection.
3.5m Mounting Height to prevent Vandalism.
Hooded design for improved external use.
Data Download
Feature
PROTECTION AREA ESPECIALLY DESIGNED TO PROTECT FROM HIGH MOUNTING POSITIONS
Offering a choice of Long Range narrow field, or Mid Range Wide Angle and equipped with N.C./N.O. output, these units are ideal for camera / light activation, or recommendable as components in security systems.
ANTI-VANDALISM
With look down zones and a tilt switch, these units are protected from vandalism and suitable for any external applications.
STRONG HOUSING CASES
The casings of these units are made from AES resin which improves the unit's durability and resistance to conditions such as wind, rain and direct sunlight.
The long steel hood helps protect the lens from direct sunlight and bird problems.
FUNCTIONS
<L/C (LED control) function>
The unit is equipped with L/C function by which the LED function
can be remotely activated/deactivated.
L/C function enables simple walk test functionality after unit is
installed.
<Tamper switch>
The units have independent tamper outputs activated by removal of cover.
<Sensitivity adjustment>
Sensitivity is adjustable between 30% and 170%.
<Pulse count> Selectable from 1, 2 or 4.
<Optical Viewfinder>
Attached Viewfinder enables easy set up for zone coverage.
RAIN-PROOF STRUCTURE
The units are constructed with weather-resistant seals to prevent water from entering.
(For exposed wiring, use water-proof grommet or conduit.)
Specification
| Model | PIR-50NE |
|---|---|
| Detection system | Passive infrared |
| Coverage | Vertical Curtain 50m (165') Max. 12 Zones(24 beams) |
| Coverage adjustment | Vertical : 10° Horizontal : +/-5° |
| Mounting position | Indoor or outdoor wall |
| Supply voltage | 9 to 30V DC (non-polarity) |
| Current consumption | 35mA Max. |
| Alarm output | ・Dry contact(semi-conductor) output (N.C./N.O.) ・24V (AC/DC) 0.25A (resistive load) (protective resistor 3.3Ω) ・Warm up : Approx.1min.(No alarm condition) ・One-shot output at detection (Approx.2sec.) ・Continuously output when detecting low supply voltage. |
| Tamper output | ・Dry contact output : (N.C.) ・24V (AC/DC) 0.1A (resistive load) ・Cover tamper output : Real time output ・Tilt switch output : Off delay output(Min. 2sec.) |
| Alarm LED | ・Red LED ・Blinks during warm up (Approx. 1Min.) ・One shot lights (Approx. 2sec.) at detection ・Continuously lights when detecting low supply voltage. |
| Functions | ・Low supply voltage alarm ・Tamper signal : Cover tamper / Tilt switch ・LED control(L/C) ・Alarm LED(ON/OFF) ・Sensitivity adjustable between 30% and 170% |
| Ambient temperature range | -20℃ to +50℃(+4°F to +122°F) without condensation |
| Wiring | Terminals |
| Weight | 56oz(1,600g) |
| Appearance | Body : AES resin , Cover : PE resin |
| Accessories | Water-proof grommet : 1pce, tapping screw : 2pcs |
* The specifications are subject to change without notice.
