Products

Reflective

PHOTOELECTRIC BEAM SENSOR PR-30BE
Outdoor 1.6ft (30m)

The newly developed PR-30BE, adopting Time of Flight technology,
can protect 30m (outdoor) with one side wiring

PHOTOELECTRIC BEAM SENSOR PR-30BE Outdoor 1.6ft (30m)

Data Download

  flile type file name Download
Product pictures JPG Pic_PR-30BE.jpg
Product catalogs PDF Data_PR-30BE.pdf

go to page top

Feature

EASY INSTALLATION

As wiring is needed only on the sensor unit (one side), you can use it in places where it is difficult to wire on both sides. One-side wiring reduces time and cost of installation sighificantly.

MORE RELIABLE PROTECTION (Time of Flight)

Adopting ToF technology makes the detection more secure regardless of environment and material/color of the object, by avoiding lost alarms caused by wrap-around of the reflected beam near the center of the detection area.

FOR INDOOR AND OUTDOOR APPLICATIONS

This sensor can be used both indoor and outdoor. Maximum detection distance can be 40m for indoor applications (hood of reflector is detachable).

EASY BEAM ALIGNMENT

Beam alignment can be adjusted on the sensor unit side only by utilizing dual ring viewfinder, monitor output and new sound check function. (Intermittent and continuous tone)

FLEXIBLE PROTECTION AREA SETTING

The lens is adjustable horizontally (+/-90 degrees) and vertically (+/-5 degrees) by thumbscrew without screw driver, allowing the unit to work in all directions.

RESPONSE TIME ADJUSTMENT

Response time can be adjusted by DIP switch with 4 steps (0.05 / 0.1 / 0.25/0.5 sec.) to reduce false alarms depending on the location.

MINIMUM OPERATIONAL DISTANCE

Even narrow zones can be protected with minimum operational detection distance of 0.5m, widening the area of applications.

EASY OPERATION CHECK

Alarm LED (red), attenuation LED, and sound check are equipped for quick and easy operation check. (After closing the cover, the sensor will enter walk test mode for a period of 5 minutes. During this time, a sounder will activate upon detection. The walk test mode will automatically terminate after 5 minutes.)

OPTION ACCESSORIES

L fitting (BL-11) is available as option to mount the reflector for protection along the wall.

go to page top

Specification

Detection system Near infrared beam interruption system (reflective)
Protection distance Outdoor 0.5 to 30m (1.7 to 100')
Indoor 0.5 to 40m (1.7 to 135')
Supply voltage 10.5V to 30V DC (Non-polarity)
(Class 2 powered device)
Current consumption 200 mA or less
160 mA or less (12V DC)
80 mA or less (24V DC)
Alarm output Dry contact relay N.C. / N.O.
Contact capacity : 30V (AC/DC) 0.25A or less
Relay operation : Normal / Real time
Normal : Interruption time (min. 2 secs)
Real time : Interruption time
Environmental output Dry contact relay N.C.
Contact capacity : 30V (AC/DC) 0.25A or less
Tamper output Dry contact relay N.C.
Action : Activated when cover is detached.
Contact capacity : 30V (AC/DC) 0.25A or less
Response time 0.05 / 0.1 / 0.25 / 0.5 sec.
Alarm LED Red LED
ON : when an alarm is initiated
Sensitivity attenuation
/Environment LED
Red LED
When front cover detached (when alignment) :
Beam is attenuated.
When front cover attached : Weather condition
gets worse. (Synchronize with Env.output)
Functions ・Monitor output   ・Response time adjustment
Ambient temperature -25℃ to + 60℃ (-13°F to +140°F)
Mounting position Outdoor / Indoor
Wiring Terminals
Weight Sensor : 370g (13oz)
Reflector : 190g (6.7oz)
Appearance Sensor : Resin (wine red)
Reflector : Resin (clear / black)

* Specifications and design are subject to change without prior notice.

go to page top