PHOTOELECTRIC BEAM SENSOR
PB-60TK(W) TWIN BEAM Outdoor 200ft.( 60m)/Indoor 400ft.(120m)

The TAKEX "TWIN"
photoelectric beam is designed to meet the highest standards of quality and reliability for photoelectric beam intrusion detection. Unique twin beams are synchronized to work together to reinforce the range and stability in severe weather conditions. The system has a rotary optical system for easy installation and the special lens design aids in proper alignment.

Catalog

PDF

HIGH RELIABILITY: Synchronized twin beams reduce false alarms caused by flying birds and falling leaves.
EXTERNAL LIGHT PROTECTION: Trouble-free condition in 50,000 lx illumination fluctuation is assured by external light compensation circuit a filter, specially designed, that cuts visible rays effectively. Excellent tolerance against sun light, automobile head light, fluorescent light or mercury light.
EASY BEAM ALIGNMENT: The special view finder allows for fast aiming and assures good alignment. Equipped with monitor jack to check sensitivity.
ROTARY OPTICAL SYSTEM: The optical system of both the transmitter and receiver can be rotated a full 180 degree which allows for side aiming.
Therefore the units do not have to be mounted face to face and the beam direction can not be discerned by simple observation.
INSECT PROTECTION: A sealed optical system prevents intrusion and interference by insects.
OTHER FEATURES: * Automatic Gain Control circuit loaded
* Wide adjustment (horizontally +/-90 degrees,vertically +/-10 degrees)
* Two different colors housing (Black/White)
PROTECTION AGAINST FROST/DEW: As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.

Product name	PHOTO ELECTRIC BEAM SENSOR
Model	PB-60TK(W)
Detection system	Simultaneous breaking, of 2 beams
Infrared beam	LED pulsed beam, Double modulation
Protection distance	Outdoor 200' (60m) or less Indoor 400' (120m) or less
Max. beam range (Approximation)	Outdoor 2000' (600m) Indoor 2000' (600m)
Response time	50msec. to 700msec. (Variable at pot)
Supply voltage	10V to 30VDC (Non-polarity)
Current consumption	80mA or less
Alarm output	Dry contact reray output form C Contact action : Interruption time + delay time (1 to 3 sec.) Contact capacity : 30V AC/DC, 0.5A or less
Tamper output	Dry contact reray N/C Action : Activated when cover is detached Contact capacity : 30V AC/DC, 0.5A or less
Alarm LED	Red LED (Receiver) ON : when an alarm is initiated.
Attenuation LED	Red LED (Receiver) ON : when an alarm is initiated.
Functions	Monitor jack output, AGC circuit, Frost proof cover
Ambient temperature range	-13F to +140F (-25C to +60C)
Mounting positions	Indoor / Outdoor
Wiring	Terminals
Weight	Transmitter : 13.3oz(380g) Receiver : 14oz(400g)
Appearance	PC resin(wine red)