PHOTOELECTRIC BEAM SENSOR
PB-100F Outdoor 330ft. (100m)

Feature

4-STACKED HIGH-POWERED BEAM(Patent)

Double modulation frequency and phased locked loop system offers high power beams that have tenfold maximum arrival distance and a hundredfold maximum sensitivity.
• Excellent tolerance for bad weather (Fog, snow, or heavy rain etc.)
• Anti-external light circuit provides excellent tolerance for sun light, mercury light, fluorescent light.
• Since simultaneous breaking of 4 beams is required to initiate an alarm, the most common causes of false alarms (small animals, birds, falling leaves) are virtually eliminated.

BEAM LEVEL INDICATl0N FOR BEAM ALIGNMENT

• Sound check function (Utility model)
lncorporates speakers in the receiver.
Sound volume is set to be maximum at the peak of received beam. You can confirm visual and audible beam alignment.
• Attenution LED
The LED lights up and informs you low sensitivity condition when the beam attenuates under a certain level. Convenient for sensitivity check after cover attached.
• Monitor jack to check if the beam level is optimal for beam alignment use.

lNSECT PROTECTION

A sealed optical system prevents interference by insects.

AGC CIRCUIT

lncorporates AGC circuit that automatically maintains proper sensitivity depending on environmental conditions.

EXCELLENT NOISE, RFl lMMUNITY

Special noise eliminator system provides excellent RFl and electrical induction noise immunity.

POLE MOUNTING/WALL MOUNTING AVAILABLE

The unit can be mounted back to back on pole and the protection line can be set at the same height.
(Utility model)
• Wide adjustable range of beam alignment
(Horizontally +/-90C, Verlically +/-10C)
• Optional accessory available
(Heater, pole, housing etc.)
• Tamper output
• Polycarbonate cover provides excellent shockproot.

PROTECT10N AGAINST FROST, DEW, FOG (Utility model)

As a special hood is attached on sensor cover, beam protection continues without interruption though the cover is screened by frost or dew.

Specification

Type	4-stacked synchronized beam
Model	PB-100F
Maximum beam range	3300'(1000m)
Protection distance	330'(100m)or less
Infrared beam	wave length 8900Å Double modulation (500Hz to 20kHz)
Light source	LED(Pulsed beam by LED)
Response time	50msec.
Alarm signa	Dry contact relay outoput form C Contactact action : lnterruption time + Delay time(Approx.1sec.) Contact capacity : 30V(AC/DC)up to O.5A
Supply voltage	12V to 30V DC (Non-polarity)
Power consumption	75mA or less(at 12V DC)
Tamper signal	Dry contact outoput 1b(N/C) Contact capacity : 30V(AC/DC)up to O.5A
Functions	Sound check.Monitor jack, Attenuation LED,Frost protection cover
Ambient temperature range	-31F to +151F (-35C to +66C)
Mounting position	Outdoor(Periphery protection)
Connection	Terminals
Weight	TR./RE 45.5oz(1.3kg)each
Appearance	Wine red PC resin

Options