PASSIVE INFRARED SENSOR
PA-460 VERTICAL CURTAIN : 55' (16.5m)

HIGH STABILITY: Immunities against Radio frequency, power line noise, Radiation noise and static electricity are improved.
SILENT RELAY: Photo-mos FET switch relay adopted at alarm output.
Completely noiseless by eliminating the movable part which is inside of the relay. At the same time, quick response and long life are maintained.
VARIOUS FUNCTIONS: All the models are equipped with Tamper, Auto-reset memory, photo-mos FET switch.
COVERAGE PATTERNS: Series is available in both wide angle and vertical curtain versions.
CREEP ZONE: Zone focused directly below sensor eliminates typical "dead" area just under unit.
AREA ADJUSTMENT: The coverage pattern can be adjusted to allow for different mounting heights by moving the inner unit.
MODE SELECTOR: Mode selector enables settings very easy.
1. Pulse count switch
PA-450 allows to set for either two or four pulse count to
initiate an alarm output.
2. Alarm LED ON/OFF switch
3. Alarm contact changeover switch
Alarm output is N.O. and N.C. selectable.
4. Memory Switch
Auto-reset memory can be disabled with this switch.

Model	PA-460
Detection system	Passive infrared
Coverage	Vertical curtain 55'(16.5m)Max
Sensitive zone	6 Pairs
Supply voltage	10 to 18V DC (non-polarity)
Current consumption	25mA Max.
Alarm output	Dry contact (semi-conductor) (N.C./N.O. selectable) Reset: Approx. 2 secs., 24V, 0.25A Max (protective resistance 3.3Ω)
Tampar output	0.1A 30V N.C.
Alarm LED (Red)	• Blinking at warming up Lighting at alarm (LED disabled) • Blinking at memory activated Lighting at memory indication
Coverage adjustment	Vertically 3steps
Pulse count	2
Alarm memory	Autoreset: 3minutes blinking, 47minutes lighting and automatically reset
Lowvoltage notice	Dry contact alarm
Ambient temperature range	-15C to +55C (+5F to +131F) without condensation
Mounting position	Indoor use only (ceiling mount with optional attachment BCW-401)
Weight	120g (4.2oz)
Appearance	Body: ABS resin Lens: PE resin