GLASS BRAEK SENSOR
GS-1100E

Feature

EASY OPERATI0N CHECK

The alarm LED and the environmental LED are available for easy operation and environmental check.

ALARM MEMORY FUNCTl0N

When the unit has been activated the alarm LED(Red) will flash for 3 minutes, after which it will remain constantly lit for 47 minutes.
This will enable identification of triggered devices in a multiple use scenario.

EASY INSTALLATI0N

The protection area is 7m Max. vertically and 8m Max.
horizontally (Variable range is 80degrees horizontally).
A single unit can protect one or more plate glass windows, which makes easy installation and maintainance possible.

OTHER FEATURES

• Sensitivity adjustment volume
• Slim and compact (32.0mm thickness of unit)
• Glass checker EG-1000 is available (Optional)

Specification

Productname	GLASS BREAK SENSOR
Model	GS-1100E
Detection system	Ultrasonic microphone
Coverage	Horizontal : 8m max. Vertical : 7m max. (plate glass of 400 square cm or more, one side 20cm)
Angle adjustment	Horizontally +/-40degrees
Power voltage	9V to 20V DC (non-polarity)
Current consumption	30mA or less
Alarm output	Dry contact relay output: N/C Reset time: approx. 2sec 30V (AC/DC) 0.1A or less.
Alarm LED	Red LED lights at alarm
Alarm memory	Alarm LED is flickering for 3 min.,lighting for 47 min. and then automatically reset at detection.
Tamper signal	Dry contact N.C.
Environmental LED	Light at bad environments(at check mode)
Ambient temperature range	+14F to +122F(-10C to +50C)
Mounting position	Indoor(wall)
Wiring	Terminals
Weight	3.86oz(120g)
Appearance	ABS resin(white)

This unit is designed to detect the sound given when glass is broken due to impact.
lf glass is broken due to stress or other means this may not be detected.

Options