FLAME SENSOR
FS-5000E DC 12V

Feature

GENERAL DESCRIPTI0N

Flame sensor FS-5000E immediately detects ultraviolet rays contained in flames and activates an external output.
The weather proof construction of the housing allows for use outdoors. lt can be widely used for fire prevention in areas where fire is prohibited.

8 SELECTABLE SENSITIVITY LEVELS

*2 sensitivity settings H & L
*4 detection timer settings : 1 sec., 6 sec., 15 sec., 30 sec.
reduce possibility of false alarms.
The set up can be selected from the 8 levels according to the environment of the installation.
Area masking enables elimination of unnecessary detection areas.

A WHITE BODY THAT MATCHES ANYWHERE

The aesthetically pleasing white housing blends well with most surroundings. The unique ball lock mechanism allows adjustment of the detection area after installation.

CONVENIENT FUNCTI0NS

･ Alarm memory function
The memory indication function enables identification of individual sensors in multiple sensor on figuration.
After raising an alarm, the memory indication LED blinks for 3 minutes and then lights for 47 minutes.
･ Day/night time discernment function
By adjusting the operation mode control switch, the output operation can be controlled according to the ambient light level.
Selectable for night time only. (5lux - ∞ lux)
･ Output time set up
The time of detection output operation can be adjusted by a switch [off delay selectable approx. 2 sec. - 1 min. or approx. 5 see. - 10 min.]

Specification

Product name	Flame sensor
MODEL NO.	FS-5000E
Detection system	Ultraviolet rays detection (Detected wave length <185 to 260nm>)
DETECTION AREA	• Distance 33ft.(10m)[2.75"(7cm)flame] • Angle Vertical : approx. 75degrees (upward : 15degrees) Hrizontal : approx. 100degrees(downward : 60degrees) • Adjustment range Vertical : downward 90degrees(horizontal - vertical) Horizontal : 180degrees
Sensitivity adjustment	･ Sensitivity H(100%),L(50%)[selectable by switch] ･ Detection timer 1sec., 6sec., 15sec., 30sec.,[selectable by switch]
Power supply	10V to 30VDC
Power consumption	35mA or less
Alarm output	• Dry contact relay Form C(alarm : open/close) Contact capacity : 30V(AC/DC)0.5A or less(resistance load) • Operation time : The following are selectable * Detection time + off delay operation approx.2sec. - 1 min. * Detection time + off delay operation approx.5sec. - 10 min. • Output operation : The following are selectable * Same time as above continuous outoput * Same time as above flashing output • Operation mode(day/night time discernment function) : 5lux(night time operation) - ∞lux(day time operation)adjustment volume
Alarm memory	The memory indication LED blinks for 3minutes and then lights for 47 minutes and automatically resets.
LED	• Operation LED(red) : synchronous dry contact relay • Memory indication LED(yellow) : blinks for 3minutes and then lights
Wiring	Reed wiring Power supply : 2 / dry contact : 3
Ambient temp. range	-4F to + 122F (-20C to +50C)
lnstaLlation	Indoor , Outdoor
Weight	approx. 19.3oz(550g)
Appearance	Sensor part : PC resin(white) Adjustment,attachment part : AES resin(white)
Accessories	* Tapping screw Φ6 × 30(SUS) : 4pcs * Tapping screw Φ4 × 8(SUS) : 1piece * Band : 1piece * Area mask seal : 1piece

* The specifications are subject to change without notice.

Options