FLASH RIGHT SIREN BEAM
PBS-15T

PBS-15T is an infrared beam sensor which consists of a transmitter and a receiver with built-in flash light and siren.
The unit is designed to intimidate intruders by initiating high-intensity LED flash lights and electronic sound siren when detection.
Volume of electronic siren is adjustable between silence and 90dB Max.

Catalog

PDF

Day light: With the day light setting, siren sound can be controlled by the illuminance of the surrounding environment.
High reliability: The unit is equipped with AND detection system which will offer more reliable protection. AND detection system will issue an alarm signal only when twin beams are simultaneously interrupted.
It will reduce nuisance alarms caused by birds, little animals or falling leaves.
Functions: Detection distance is 50 ft (15m).
Frequency is selectable for L or H to avoid cross talk.
Response time is adjustable between 0.05 sec. and 0.7 sec.
Other features: Beam alignment is adjustable horizontally by up to +/-90 degrees.
Flash lights light on during interruption time + Delay time (1min.).
AGC circuit
Frost proof cover

Description	Flash light siren beam
Model	PBS-15T
Detection distance	Outdoor 50' (15m) or less (Indoor 100' (30m))
Max. arrival distance	Outdoor Tenfold 500' (150m) Indoor Fivefold 500' (150m)
Infrared beam	Double modulation pulsed beam by LED
Detection system	Simultaneous breaking of 2 beams
Response time	0.05sec. to 0.7sec. variable (Standard: 0.05sec.)
Supply voltage	10V to 18V DC (Non-polarity)
Current consumption	Transmitter: 24mA / Receiver: 250mA
Day light	Recognize it is night when surrounding environment is darker than the set illuminance.
Alarm output	Dry contact relay output NO/NC selectable Contact: 30V AC/DC 0.5A (Resistive load) Contact action: Interruption time (Min. 2sec.)
Tamper output	Dry contact output NC Contact capacity: 30V AC/DC 0.1A
Flash light output	Color: Red Interruption time + Delay time (1min.)
Siren output	Volume: Silence to approx. 90dB/1m Variable with a volume Siren timer: 5sec./20sec. selectable (One-shot operation)
Alarm LED	Red LED (Receiver) Lights when an alarm is initiated.
Attenuation LED	Red LED (Receiver) Lights when beam is attenuated.
Transmitting LED	Green LED (Transmitter) Lights when beam is transmitted.
Functions	Frequency selectable for L or H, AGC circuit, Frost proof cover
Ambient temperature range	-13F to +140F (-25C to +60C)
Beam alignment adjustment	Horizontal: +/-90 degrees
Installation	Indoor/Outdoor
Wiring	Terminals
Weight	Transmitter: 560g Receiver: 620g
Appearance	PC resin (wine red)