PASSIVE INFRARED SENSOR
PA-480S SUPER WIDE ANGLE

Feature

WALL MOUNT 180° COVERAGE

Two twin elements cover 90° each to create a full 180° pattern. Each 90° area can be vertically adjusted up or down to create the required coverage pattern.

TROUBLE ALARM -LOW VOLTAGE-

When sensor detects a drop in supply voltage, a trouble alarm is initiated.
*Alarm LED disable(ON/OFF)
*Signal count selectable(2 signals / 4 signals)
*Anti-creep zone

Specification

Model	PA-480S
Detection	Passive infrared (Twin element, pulse count)
Coverage	Super wide angle redius 26'Max (8m)
Number of sensitive zone	32 pairs (64)
Mounting positions	Indoor wall / pillar
Supply voltage	9 to 18 V DC (non-polarity)
Power consumption	32mA Max
Alarm output	Dry contact relay (N.C.) Reset : approx. 2 sec. 30V・0.1A Max (protective resistance 3.3Ω built-in)
Temper output	Dry contact (N.C.) Ooen when cover is detached 30V ･ 0.1A Max
Alarm LED	Red LED(2) Warm up : flickering (every 0.5 sec.) Alam : solid (approx. 2 sec.) Trouble alam : continuous solid (LED disable)
Ttouble alarm	Low power voltage : monitors drop in power voltage Operate : initiate trouble alarm
Ambient temp. range	+14F to +122F (-10C to +50C) without condensation
Wiring	Terminals
Area adjustment	Downward 5 positions
Weight	5.8oz. (165g)
Accessory	Fixing screw : 4 × 30 2pcs. Area lock screw : 3 × 10 1pce.

The passive infrared sensor is designed to detect infrared energy variations caused by the presence of a human body. Therefore, note that similar variations in conditions in protected area, due to other reasons, may cause the sensor to create an alarm as it is unable to distinguish between sources.

Options