PHOTOELECTRIC BEAM SENSOR
PB-IN-100HF Outdoor 330 ft. (100m)

The TAKEX intelligent "QUAD" photoelectric beam is especially designed for outdoor protection.
Unique Quad beams are synchronized to work together to reinforce the range and stability in severe weather conditions. The PB-IN-HF series beams are equipped with many features which provide a wide choice of field selectable options. These options result in considerable flexibility for a variety of application requirements.

Download

Catalog

PDF

Feature
Dimension
Detection Area
Specification
Options

Feature

4 SYNCHRONIZED HIGH POWER INFRARED [PATENTED]: * 4 beams are "and-gated", which helps to prevent false alarms from falling leaves and small animals.
* The active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.
* External light compensation circuit provides excellent tolerance against sun light, automobile head lights, fluorescent light or mercury light.
FOUR FREQUENCIES SELECTIONS: 4 separate choices of frequency avoids cross-talk in stacked or long linear installations.
BEAM TRANSMISSION STRENGTH SELECTION: 2 levels of beam transmission strength which can be set to suit the protection distance.
EASY BEAM ALIGNMENT: * Audible signal for alignment [Utillty model]
An alignment tone aids in quick set-up to beams. The tone becomes maximum at peak of beam level.
* Sensitivity attenuation LED
Lights when beam level is attenuated, which shows low sensitivity.
* Monitor jack output
AUTO-GAIN LOCK: Optimal sensitivity gain is automatically set at any coverage distance up to the maximum protection distance. Aut-Gain lock is easily confirmed by sound check.
PROGRAMMED AGC: Sensitivity is automatically increased in bad weather to contend with fog, heavy rain, frost or snow.
ALARM MEMORY: Alarm memory LED located on receiver can be automatically reset (flickering 5 min. after an alarm and auto-reset 55 min. after that) or manually controlled.
PROTECTION AGAINST FROST/DEW: As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.
ENVIRONMENTAL MODULE BUILT-IN: Environmental trouble signal is sent when beam reception level is reduced below an acceptable level.
* Wide adjustment (horizontally +/-90°, vertically +/-10°)
* Tamper output
* Polycarbonate cover excellent at antishock
* Optional accessories

Specification

Product name	Photoelectric beam sensor
Model	PB-IN-100HF
Detection system	Near infrared beam interruption system (TR.-RE. 4 beams simultaneous interruption)
Infrared beam	Double modulation pulsed beams by LED
Protection distance	Outdoor 330' (100m) or less
Max. arrival distance	Tenfold 3300' (1000m)
Response time	50msec. to 700msec. variable (Standard : 50msec.)
Power supply	12V to 30V DC (non-polarity)
Current consumption	70mA or less at protection (max. 105mA or less)
Alarm output	Dry contact relay output 1c Reset : Interruption time + off-delay (approx. 1.5sec) Contact capacity: 30V (AC/DC) 1A or less
Enviromental output	Dry contact relay : 1a or 1b (selectable) Contact operation : Output when weather condition gets worse Contact capacity: 30V (AC/DC) 1A or less
Tamper output	Dry contact relay : 1b Contact operation : Output when receiver cover is detached Contact capacity: 30V (AC/DC) 1A or less
Alarm LED	Red LED (receiver) lights when an alarm is intiated
Sensitivity attenuation LED	Red LED (receiver) lights when beam reception is attenuated
Functions	Modulated beam frequancy selection, Tone indicator, Environmental module,Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor jack.
Beam adjustment	Horizontal : +/-90°, Vertical : +/-10°
Ambient temperature range	-31F to +151F (-35C to +66C)
Mounting position	Outdoor
Wiring	Terminals
Weight	Transmitter : 42oz (1200g) Receiver : 45.5oz (1300g)
Appearance	PC resin (wine red)