DUAL ZONE OUTDOOR PIR FOR WIRELESS TRANSMITTER
TX-114SR Dual Zone : Variable Angle up to 90 degrees

Feature

Low Current Consumption

The TX series of Indoor/Outdoor PIRs exhibit extremely low current consumption while deployed in the field. The Takex advantage is illustrated below over conventional approaches; when considering real world scenarios indicative of overall consumption (quiescent and alarm condition).

Dual zone system

This sensor is equipped with a Dual zone system which initiates an alarm only when detection occurs in both horizontal and downward zones simultaneously.
No alarm signal is given if only one zone is activated by small animals, vehicles etc.

Rain Proof Housing

Rain-proof structure facilitates outdoor installation.
Various mounting position such as wall and pole can be chosen.

Flexible Battery Choices

･ Lithium Ion batteries are recommended
･ Uses readily available 3 VDC (CR123) to　9VDC batteries
･ Can be configured for shared power　operation (sensor + TX)

Proprietary Polymer Formulation

Rated to IP54, Takex engineered　Polymer materials, seal out and　withstand the effects of harsh　environmental　conditions. Takex outdoor　devices are　designed for years of　reliable use, with negligible evidence of　sun and　environmental damage, which　can affect long term plastic and sensor　viability.

Zone Masking Sheet

Customize coverage　or mask unwanted　zones easily, with the　included zone
masking sheet.

Sensitivity adjustment

Sensitivity can be adjusted between 30% and 170%.

Specification

Model	TX-114SR
Detection system	Passive infrared
Coverage	When horizontal detection Angle: 90° Detection distance: 40'(12m) Horizontal zone: 7 zones Downward zone: 7 zones
Coverage adjustment	Horizontal: 90 degrees Detection distance:10' to 40' (3m to 12m) (Adjustable by changing the vertical angle of downward curtain)
Supply voltage	3V to 9VDC Alkaline or Lithium Battery
Operation voltage	2.3V to 10VDC
Current consumption	25μA 5mA/3V (Test mode)
Operation	Solid State Switch N.C./N.O. selectable 10VDC · 0.01A Max •Alarm output (Blue wires) One shot output when detecting human beings (approx. 2sec) •Tamper output (Green wires) Real time output · when the cover is detatched from the unit •Trouble output Real time output when the unit suffers functional trouble. (from wire of Alarm)
Operation LED	Red LED •Blinking for approx.1min at warming-up •Lighting for 1sec at detection during walk-test (LED lights only in a test-mode) •Blinking when trouble alarm is issued (Lights once every 5 sec)
Sensitivity adjustment	Approx. 30% to 170% (by rotary switch)
Pulse count	Once/Three times selectable (by dip switch)
Alarm prohibition time	10sec/120sec/300sec/900sec selectable (by dip switches)
Ambient temperature	-4°F to +122°F (-20°C to +50°C)
Mounting position	Indoor/Outdoor [Wall or Pole]
Weight	14.1oz (400g)
Appearance	Body: AES resin 　　Lens: PE resin
Accessories	Adhesive sheet: 1 pc Mounting screw: 2 pcs Battery holder: 1 pc Area masking sheet: 1 pc
Optional	Wall mount attachment (BW-24) Pole attachment (BP-22)

Options