PASSIVE INFRARED SENSOR
PIR-30WE Wide angle protection

Feature

PROTECTION AREA ESPECIALLY DESIGNED TO PROTECT FROM HIGH MOUNTING POSITIONS

Offering a choice of Long Range narrow field, or Mid Range Wide Angle and equipped with N.C./N.O. output, these units are ideal for camera / light activation, or as components in security systems.

SUITABLE FOR INDOOR AND OUTDOOR USE

With a rain-proof casing, these units are suitable for both internal and external applications.

STRONG HOUSING CASES

The casings of these units are made from AES resin which improves the unit's durability and resistance to conditions such as wind, rain and direct sunlight.
The long steel hood helps protect the lens from direct sunlight and bird doroppings problems.

FUNCTIONS

･ L/C (LED control) function
The unit is equipped with L/C function by which the LED function can be remotely activated/de-activated.
L/C function enables simple walk test functionality after unit is installed.
･ Tamper switch
The units have independent tamper outputs activated by removal of cover.
･ Sensitivity adjustment
Sensitivity is adjustable between 30% and 170%.
･ Optical Viewfinder
Attached Viewfinder enables easy set up for zone coverage.

RAIN-PROOF STRUCTURE

The units are constructed with weather-resistant seals to prevent water from entering.
(For exposed wiring, use water-proof grommet or conduit.)

Specification

Model	PIR-30WE
Detection system	Passive infrared
Coverage	Wide angle 100' (30m) Max. 30 Zones(60 beams)
Coverage adjustment	Vertical : 10° Horizontal : +/-5°
Mounting position	Indoor or outdoor wall
Supply voltage	9 to 30V DC (non-polarity)
Current consumption	25mA Max.
Alarm output	･ Dry contact(semi-conductor) output (N.C./N.O.) ･ 24V (AC/DC) 0.25A (resistive load) 　(protective resistor 3.3Ω) ･ Warm up : Approx.1min.(No alarm condition) ･ One-shot output at detection (Approx.2sec.) ･ Continuously output when detecting low supply voltage.
Tamper output	･ Dry contact output : (N.C.) ･ 30V (AC/DC) 0.1A (resistive load) ･ Tamper output : Real time output
Alarm LED	･ Red LED ･ Blinks during warm up (Approx. 1min.) ･ One shot lights (Approx. 2sec.) at detection ･ Continuously lights when detecting low supply voltage.
Functions	･ Low supply voltage alarm ･ Tamper signal ･ LED control(L/C) ･ Alarm LED(ON/OFF) ･ Sensitivity adjustable between 30% and 170%
Ambient temperature range	+4F to +122F(-20C to +50C) without condensation
Wiring	Terminals
Weight	56oz(1600g)
Appearance	Body : AES resin , Cover : PE resin
Accessories	Water-proof grommet : 1pce, tapping screw : 2pcs

Options