Products

Sensor Speaker

SENSOR SPEAKER PVW-12TE

PVW-12TE is a sensor speaker which detects passive infrared emitted from human beings and sound two different messages depending on the day light or control input settings.

SENSOR SPEAKER PVW-12TE

Data Download

  flile type file name Download
Product pictures JPG Pic_PVW-12TE.jpg
Product catalogs PDF Cat_PVW-12TE.pdf

go to page top

Feature

Suitable for indoor and outdoor use

Designed to be rainproof, PVW-12TE can be used outside.
It is equipped with AND detection system which will offer more reliable protection.
AND detection system will issue an alarm signal only when detection occurs in both horizontal and downward zones simultaneously.

Two recordable messages / Dual control (daylight or
ARM/DISARM settings)

The unit can record two different messages (Max. 8sec. each).
At detection, it will trigger one of the messages depending on the day light or control input (ARM/DISARM) settings.
• Day light control
Night:Message 1 , Day:Message 2
• External input control
ARM:Message 1 , DISARM:Message 2

Two recording methods available

Message can be recorded through built-in microphone or jack input which fits to external equipments such as tape recorders or personal
computers.

Trigger input equipped
A replay input can trigger a message.

Connected to two or more sensors or controllers, the unit can be used as a sounder to intimidate intruders.

Alarm contact output equipped

Equipped with alarm contact output, the unit can send a signal to remote areas when detection occurs.

Replay time adjustable

Replay time of messages is adjustable between 2sec. and 5min.

go to page top

Specification

Product name Sensor speaker (For indoor/outdoor use)
Model PVW-12TE
Detection system Passive infrared
Coverage Horizontal coverage
Max. detection distance: 40' (12m) Horizontal detection zone: 7 zones
Detection angle: 90degrees Downward detection zone: 7 zones
Adjustment range Horizontal: +/-90degrees(+/-3degrees of fine adjustment is available)
Detection distance: 10' to 40' (3 to 12m)
(By adjusting vertical angle of downward curtain)
Supply voltage 10 to 30VDC (Non polarity)
Current consumption 55mA MAX. for standby
300mA MAX. for operation (When Max. volume)
ARM/DISARM input ・N.O./N.C. selectable with a switch
 N.O.: Armed when closed
 N.C.: Armed when opened
・Response time: 300msec or longer
・Input resistance: 1kΩ; or less
Replay input ・N.O./N.C. selectable with a switch
 N.O.: Armed when closed
 N.C.: Armed when opened
・Response time: 300msec or longer
・Input resistance: 1kΩ or less
Day light control Recognized as night when the illuminance of the surrounding
area is lower than the set illuminance.
Contact output Dry contact relay output N.O./N.C. selectable with a switch
Contact capacity: 30V (AC/DC), 0.5A MAX.
Contact operation: One shot operation Approx. 2sec.
Sound output Replay the two different messages through the built-in speaker
Operation: off delay operation
Repeat sounds during detection time + Approx. 2sec. to 5min.
Output sounds: [Message 1] and [Message 2] (Max. 8sec. each)
Sound volume adjustment: 80dB Max.
Recording method: Built-in microphone or Jack input
Operation LED Red LED
Blinks for warming-up - LED can be disabled with a switch.
Lights for detection - LED can be disabled with a switch.
Fast blinks for recording standby
Lights for recording (Max. 8sec.)
Tamper output Dry contact relay output: NC
Capacity: 30V (AC/DC), 0.5A MAX.
Pulse count settings Once / Three times (Selectable with a switch)
Sensitivity adjustment 30% to 170% (By potentiometer)
Connection Terminals
Ambient temperature - 4F to + 122F (- 20C to + 50C)
Mounting position Indoor / Outdoor (Rain-proof)
Weight 16.8 oz (480g)
Appearance Body: AES resin Lens: PE resin

Note
1, The sensor speaker is designed as a simple warning device.
When using the sensor outdoor, make sure that the use of the sensor does not have a serious impact on the performance of the connected system or does not cause a nuisance to surrounding environment.
2, When an object within the detection zone is exposed to external environment and subject to temperature fluctuations, the sensor speaker may cause false or no detection.
Sensitivity of passive infrared sensor deteriorates when ambient temperature is close to human temperature.
Moving objects like trees or bushes within the detection zone may trigger an alarm.
3, As a component of high security system for outdoor, photoelectric beam sensors, combination sensors or fence sensors are recommended.

go to page top