Products

Outdoor

TRIPLE MIRROR PASSIVE SENSOR PIR-T15AM(G)
Wide angle protection

A unique triple mirror optical system with signal processing technology eliminates nuisance alarms from small animals (Wide angle protection up to 49’ (15m) × 80° with anti-masking)

TRIPLE MIRROR PASSIVE SENSOR PIR-T15AM(G) Wide angle protection

Data Download

  flile type file name Download
Product pictures JPG Pic_PIR-T15AM_G.jpg
Product catalogs PDF Cat_PIR-T15AM_G.pdf

go to page top

Feature

TRIPLE MIRROR OPTICAL SYSTEM

The unique combination of triple mirrors and three twin pyros enable 4 selectable operation modes including low position, high position, pet, and high density; for distances up to 49’ (15m) from a mounting height of 6.6’ (2m) to 20’ (6m), throughout a full 80°.

OPTIMISED DETECTION AREA

The triple mirror optical system features a geared mirror array allowing detection patterns to be dynamically optimised for maximum performance depending on the chosen mounting height and operation mode.

PET IMMUNITY

Independently controlled pyro devices in each optical unit use intelligent signal processing to eliminate nuisance alarms from small animals, and a dedicated pet operation mode further enhances discrimination performance against medium-sized animals.

PRECISE AREA ADJUSTMENT

Precise detection area adjustment is made possible by projecting coloured LED’s onto the surface of each mirror -visible only from inside the detection zone during the alignment process allowing sensitive zones to be fine-tuned to individual site requirements as desired. Unnecessary areas can be cancelled using the supplied area-masking sheet.

DESIGN CONSCIOUS

The PIR-T15AM’s unassuming design allows it to blend discreetly into any industrial, commercial or domestic environment, and the internally adjustable optic system helps to conceal the detection area and direction for more secure protection.

OTHER FUNCTIONS

Enhanced features including creep zone detection, near area cancellation, dual outputs, lightning surge protection and anti masking make the PIR-T15AM a key addition to the TAKEX family of high performance intrusion detection sensors.

go to page top

Specification

Model Triple mirror passive sensor
Model number PIR-T15AM(G)
Detection system Passive infrared
Detection area Wide angle (80°) detection
Detection distance: 49’(15m), 108 rays (54 pairs)
Power supply 9 to 28V DC (non-polarity)
Current consumption Max. 50mA
Alarm output Contact method : Dry semi-conductor contact, N.C./N.O. selectable
Contact operation : One-shot operation when detecting intrusion
Continuous output in the event of cover monitor error
Continuous output in the event of alignment position error
Continuous output in the event of self diagnosis error
Continuous output in the event of power voltage error
Continuous output in the event of long-term diagnosis error
Contact rating : 24V (AC/DC) 0.25A (resistive load)
(built-in contact protective resistor 3.3Ω)
External output Contact method : Dry semi-conductor contact N.O.
Contact operation : One-shot operation/Off delay operation selectable when
detecting intrusion
Contact rating : 24V (AC/DC) 0.25A (resistive load)
(built-in contact protective resistor 3.3Ω)
Tamper output Contact method : Dry mechanical contact, N.C.
Contact operation : Continuous output
Contact rating : 24V (AC/DC) 0.1A (resistive load)
(built-in contact protective resistor 3.3Ω)
Anti-masking output Contact method : Dry semi-conductor contact N.C.
Contact operation : Continuosly output when an object is
placed in front of the lens (until nomal recovery)
Contact rating : 24V (AC/DC) 0.25A (resistive load)
(built-in contact protective resistor 3.3Ω)
Alarm LED Red LED : Blinks* during warm up
Lights up* when detecting intrusion
Continuously blinks in the event of cover monitor error
Continuously lit in the event of alignment position error
Continuously blinks in the event of self diagnosis error
Continuously lit in the event of power voltage error
Continuously blinks in the event of long-term diagnosis error
Continuously blinks in the event of Anti-masking error
(*ON/OFF selectable using the mode selector)
Memory LED Red LED : Blinks for 3 minutes during memory display, Auto reset operation either
of continuous lighting for 47 minutes or blinking for 50 minutes selectable
(Blinks to lights/blinks, ON/OFF selectable using the mode selector)
Functions Sensitivity selection
Operation mode selection
Alarm memory LED
Self diagnosis
Low voltage monitoring
Temperature compensation
LED area checker
Front & back tamper
Environmental adjustment
Creep zone detection
Walk test mode
Near area cancellation
Long-term diagnosis
Anti-masking
Installation height 6.6’ to 20’(2.0 to 6.0m) (varies depending on the operation mode)
• Low position mode : 6.6’ to 9’(2.0 to 2.7m)
• High position mode : 9’ to 11.5’(2.7 to 3.5m)
• Pet mode : 8.3’ to 10’(2.5 to 3.0m)
• High density mode : 6.6’ to 20’(2.0 to 6.0m)
Area angle adjustment range Horizontal direction :±45° (in 5° steps)
Vertical direction :17° (no stage adjustment)
Ambient temperature range -25 to +55˚C (no condensation and freezing)
Mounting position Indoor/outdoor wall surface
* Can be mounted on poles and ceilings (or under eaves) using optional accessories
IP rating IP55
Connections Terminals (M2.6 self up terminal)
Weight Approx. 600g
Appearance Body:Resin (gray), Window:Resin (white)

go to page top